|
Reflecti-Guard Retro-Reflective Photo Optic Sensor Mounting Options
Other News
Subscribe to FREE newsletter
| Nov 21, 2017 |
Reflecti-Guard™ reflective photoelectric sensor is intended to detect the presence of an obstacle when the infrared light beam is interrupted. A single unit houses the light emmiter and recevier. A beam of light is sent from the emmitter to a relector at sends the light beam back to the receiver. The system is compatible with nearly all brands of UL325 Recognized gate operators and can be configured for relay or pulsed signals.
Reflecti-Guard's rugged housing makes it suitable for both indoor and outdoor installations. Suggested applications include motorized doors and gates where an interruption would signal the motor to reverse; toll booths and parking lots where an interruption would cause a signal to change.
IG2-B1
Optional ergonomic protective boot cover
IG2-P1
Optional pedestal mount
Functional Benefits
- Several models designed to work with pre- and post-2010 door operators and pre- and post-2016 gate operators
- Spans distances up to 30’
- Vertical mounting
- Easy, time-saving installation with alignment LED
- UL 325 recognized component for doors and gates
- NEMA 4 enclosure
- Impact resistant for rugged environments
- Enhanced sunlight immunity
- Built-in strain relief
- UL 325 recognized
Reflecti-Guard™ Retro-Reflective Photo Optic Single Beam Models
- RG-R relay output: N.O., N.C. or 10K resistive
- RG-P pulsed output: 2 wire or 4 wire
For other relevant searches, you might want to try: