architecture - engineering - construction
AECinfo.com

Kingspan Insulation GreenGuard Type IV Insulation Board

 

Kingspan Insulation GreenGuard Type IV Insulation Board

Kingspan GreenGuard® Type IV XPS Insulation Board comprises closed–cell extruded polystyrene (XPS) with a minimum compressive strength of 25 psi. It has high water resistance and an R–value of 5.0 per inch of thickness.

It retains its insulating properties over time. Use this insulation for below slab, cavity wall, and foundation applications. It is available in a square edge board, ship–lap edge board, pre-cut 16 inch wide board and a score board.

Product Highlights

  • R-value of 5.0 per inch of thickness
  • More moisture resistant than standard EPS
  • Retains its insulating properties over time

@KingspanIns_US #KingspanIns_US #Kingspan #Insulation #MoistureManagement

For other relevant searches, you might want to try:

(06 16 00) Sheathing
(06 16 26) Underlayment
(06 16 53) Moisture-Resistant Sheathing Board
(07 10 00) Dampproofing and Waterproofing
(07 19 00) Water Repellents
(07 20 00) Thermal Protection
(07 21 00) Thermal Insulation
(07 21 13) Board Insulation
(07 21 13.13) Foam Board Insulation
(07 21 13.16) Fibrous Board Insulation
(07 21 13.19) Mineral Board Insulation
(07 22 00) Roof and Deck Insulation
(07 22 16) Roof Board Insulation
  (07 24 00) Exterior Insulation and Finish Systems
(07 40 00) Roofing and Siding Panels
(07 42 00) Wall Panels
(07 46 00) Siding
(07 77 00) Wall Specialties
(07 90 00) Joint Protection
(07 91 00) Preformed Joint Seals
(07 92 00) Joint Sealants
(07 92 13) Elastomeric Joint Sealants
(09 28 00) Backing Boards and Underlayments
(09 81 00) Acoustic Insulation
(10 71 00) Exterior Protection