architecture - engineering - construction
AECinfo.com

About Roofing Coatings

Roofing Coatings

Roofing Coatings

HBS Roofing coatings are commonly used in roofing assemblies that create an economical and effective roofing system for applications over new and existing roofing substrates in order to extend the life of the current roof (weather roof system).  HBS Roofing Coating Systems protects, preserves, and prolongs the life of commercial and multi-family roofs.

THERMO-SIL NP (Silicone Coating)

Thermo-Sil NPTM High Solids Silicone Roof Coating is a single component, moisture curing silicone rubber roof coating system designed for use on existing smooth surface BUR, granulated cap sheet, well-adhered acrylic coating, concrete, metal, sprayed-in-place polyurethane foam and various single-ply membrane roofing.

  • Reconditions, preserves and extends the useful life of roofs
  • Controlled flow properties allow a continuous, even film to be applied even on rough surfaces
  • Forms a tough, flexible membrane that is integral with the structure itself

THERMO-SIL 2200 (Silicone Coating)

Thermo-Sil 2200 Series silicone roof coating is a single-component, moisture-curing silicone rubber roof coating system designed for use on existing smooth surface BUR, granulated cap sheet, well-adhered acrylic coating, concrete, metal, sprayed-in-place polyurethane foam and various single-ply membrane roofing.

  • Withstands extreme weather conditions, damp heat and UV rays
  • Seals and Protects against permanent ponding water
  • Great adhesion, Continuous membrane

THERMO-SIL LS 2200 (Silicone Coating)

Thermo-Sil LS 2200 is a silicone, elastomeric low-solids, solvent-free roof coating designed to provide a protective wear surface, reflectivity, and renewability. It is a moisture-cured roof coating designed to provide long-lasting performance in the most rigorous climates.

  • Withstands extreme weather conditions, damp heat and UV rays
  • Seals and protects against permanent ponding water
  • Great adhesion, Continuous membrane

THERMO-SIL HS 3200 (Silicone Coating)

Thermo-Sil HS 3200 Series silicone roof coating is a high solids single-component, moisture-curing silicone rubber roof coating system designed for use on existing smooth surface BUR, granulated cap sheet, well-adhered acrylic coating, concrete, metal, sprayed-in place polyurethane foam and various single-ply membrane roofing.

  • Withstands extreme weather conditions, damp heat and UV rays
  • Seals and protects against permanent ponding water
  • Great adhesion, Continuous membrane

THERMO-SIL PRO 9600 (Silicone Coating)

Thermo-Sil Pro™ 9600 is the ultimate high solids silicone coating for professionals in the roofing industry. Advanced direct-bond technology provides extreme adhesion and proven protection against high winds and weather.

  • Cost-saving alternate solution to re-roofing the building structure
  • Coat metal buildings to prevent rust
  • Use on low-sloped or flat roof systems, vertical walls, masonry, metal and more!

THERMO-SIL PRO Roof Patch (Silicone Coating)

Thermo-Sil Pro Roof Patch is a solvent-based fibered silicone mastic intended for use as a direct-bond, permanent patch and repair product. 

  • Repair membrane punctures caused from hail damage
  • Fix mechanically induced damage from foot traffic, HVAC servicing, and other related membrane perforations
  • Permanently seal joints and fasteners on a variety of roofing details and applications

THERMO-SIL PRO Seam Sealer (Silicone Coating)

Thermo-Sil Pro Seam Sealer is high-performing, professional grade seam sealer. It is designed to seal abnormal roof penetrations that cannot be covered with standard sprayers or rollers.

  • Ease of application
  • Fast moisture cure
  • Superior adhesion to a variety of substrates

THERMO-SIL PRO Bleed Blocker (Silicone Coating)

Thermo-Sil ProTM Bleed Blocker is a highly engineered acrylic single component, water-based primer designed for application over BUR, Mod-Bit, and smooth or mineral surfaced cap sheet. 

  • Severe Hail Rated with LPA Roofing Foam and Coating System
  • Superior exterior durability and UV light resistance
  • Seamless, fully-adhered elastomeric membrane

THERMO-SIL SP-11 (Silicone Epoxy Primer)

SP-11 is a black, single-component epoxy primer incorporating state-of-the-art water-based technology to produce an extremely versatile product that penetrates and seals porous substrates. It is effective at increasing the bond of silicone topcoats to a variety of surfaces and will also help to “solidify” punky or chalky surfaces.

  • Adhesion - penetrates and “wets” into porous surfaces, imparting a tenacious chemical and physical bond between the substrate and topcoat
  • Easy cleanup and minimum maintenance
  • Deep penetrating to preserve dense surfaces

THERMO-SIL SP-14 (Silicone 2-Part Epoxy Primer)

Thermo-Sil SP-14, as provided, is a two-component, 1 to 4 ratio, water-based epoxy primer designed to go onto multiple substrates.

THERMO-SIL SP-15 (Single-Ply Primer)

 

Thermo-Sil SP-15 has been formulated with specialty polymers to maximize adhesion to PVC and TPO membranes and to resist the migration of plasticizers from the PVC membrane.

THERMO-SIL Flashing Grade Silicone Sealant

Thermo-Sil Flashing Grade Silicone Sealant is a thick, high-build liquid that is a dispersion of 100% silicone rubber. It is designed to seal abnormal roof penetrations that cannot be covered with standard sprayers or rollers. It features low odor, ease of application, fast moisture cure, and superior adhesion to a variety of substrates.

  • Low odor
  • Easy to apply
  • Fast moisture cure

RCS 5000 Restoration Coating System (Acrylic Coating)

RCS 5000 is a premium fluid-applied, elastomeric roof coating designed to extend the life of new and existing built-up asphalt, modified bitumen, asphalt shingle, single-ply, galvanized metal, concrete and plywood roofs. It is ideal for low slope roofs with positive drainage.

  • Superior exterior durability and UV light resistance
  • Excellent adhesion to most roofing materials
  • Seamless, fully-adhered elastomeric membrane inhibits leaks

RCS 5000C Restoration Coating System (Acrylic Coating)

RCS-5000C is a premium quality, fluid-applied elastomeric roof coating manufactured using advanced all-acrylic polymer technology. The fully-adhered seamless membrane exhibits outstanding adhesion, strength, flexibility and water resistance.

  • Superior exterior durability and UV light resistance
  • Excellent adhesion to most roofing materials
  • Seamless, fully-adhered elastomeric membrane inhibits leaks

RCS 5000FS Restoration Coating System (Acrylic Coating)

RCS 5000FS is a premium fluid-applied, fast-set elastomeric roof coating designed to extend the life of new and existing built-up asphalt, modified bitumen, asphalt shingle, single-ply, galvanized metal, concrete and plywood roofs. It is ideal for low slope roofs with positive drainage.

  • Superior exterior durability and UV light resistance
  • Excellent adhesion to most roofing materials
  • Seamless, fully-adhered elastomeric membrane inhibits leaks

RCS 5000QS Restoration Coating System (Acrylic Coating)

RCS 5000QS is an acrylic fluid-applied, quick-set elastomeric coating designed to enhance energy savings and water resistance, protecting and increasing the longevity of the structure. It withstands intense heat and ultraviolet rays in humid climates.

  • Superior exterior durability and UV light resistance
  • Severe Hail Rated with LPA Roofing Foam and Coating System
  • Seamless, fully-adhered elastomeric membrane

RCS 600 Restoration Coating System (Acrylic Coating)

RCS 600 is a fluid-applied, elastomeric roof coating designed to extend the life of new and existing built-up asphalt, modified bitumen, asphalt shingle, single-ply, galvanized metal, concrete and plywood roofs. It is ideal for low slope roofs with positive drainage.

  • Superior exterior durability and UV light resistance
  • Excellent adhesion to most roofing materials
  • Seamless, fully-adhered elastomeric membrane inhibits leaks

RCS 650 Restoration Coating System (Acrylic Coating)

RCS 650 is a fluid-applied, elastomeric roof coating designed to extend the life of new and existing built-up asphalt, modified bitumen, asphalt shingle, single-ply, galvanized metal, concrete and plywood roofs. It is ideal for low slope roofs with positive drainage.

  • Superior exterior durability and UV light resistance
  • Excellent adhesion to most roofing materials
  • Seamless, fully-adhered elastomeric membrane inhibits leaks

RCS 30 Restoration Coating System (Acrylic Primer)

RCS 30 is a 100% acrylic emulsion, waterborne, corrosion-resistant direct to metal primer for both construction and industrial maintenance applications. It can be used directly over metal substrates to dramatically improve adhesion of Huntsman Building Solutions RCS Restoration Coating System 100% acrylic elastomeric roof coatings when substrates are less than optimal.

  • Chemical resistant
  • Chemical resistant
  • Outstanding exterior durability

RCS 40 Restoration Coating System (Rinseable Primer)

RCS 40 rinseable primer is a surface treatment solution that alters the surface chemistry of EPDM membranes to dramatically improve adhesion of Huntsman Building Solutions RCS 5000 Restoration Coating System, 100% acrylic elastomeric roof coatings.

  • Environmentally safe (diluted rinse water)
  • Easy to apply
  • Easy soap and water clean-up

RCS 4000 Restoration Coating System (Acrylic Primer)

RCS 4000 is a premium quality, fluid-applied, elastomeric roof coating manufactured using advanced all-acrylic polymer technology. The fully-adhered seamless membrane exhibits superior adhesion to new asphaltic roofing materials.

  • Superior adhesion to new asphaltic roofing membranes
  • Excellent resistance to asphalt “bleed-through” staining
  • Seamless, fully-adhered elastomeric membrane inhibits leaks

RCS 6000 Restoration Coating System (Acrylic Shingle Sealer)

RCS 6000 Shingle Sealer is a premium quality acrylic emulsion that is designed to penetrate and bond to shingles, sealing granules down and beautifying the roof. The fully cured film dries to an attractive satin gloss finish that cleans easily with water and mild detergent.

  • Low toxicity and odor (environmentally safe)
  • Easy soap and water clean-up (user friendly)
  • Excellent adhesion and durability

THERMO-FLEX 250 (Acrylic Coating)

Thermo-Flex 250 is an economical acrylic elastomeric roof coating uniquely formulated for the protection of polyurethane foam roofing insulation on all new and existing roof substrates. It is designed to withstand the intense heat and ultra-violet rays of low humidity desert environments.

  • Reflectivity - UV light resistance
  • Energy conservation - reduces building’s energy load and thermal conductivity
  • Life-cycle cost reduction with long-term performance and longevity of the roof

THERMO-FLEX 500 (Acrylic Coating)

Thermo-Flex 500 acrylic roof coating is an acrylic elastomeric fluid-applied coating designed to enhance energy savings and water resistance, thereby protecting the assets and increasing the longevity of the structure.

  • Superior exterior durability and UV light resistance
  • Seamless, fully-adhered elastomeric membrane
  • Water-resistant

THERMO-FLEX 750 (Acrylic Coating)

Thermo-Flex 750 acrylic roof coating is an acrylic elastomeric fluid-applied coating designed to enhance energy savings and water resistance, thereby protecting the assets and increasing the longevity of the structure.

  • Superior exterior durability and UV light resistance
  • Severe Hail Rated with LPA Roofing Foam and Coating System
  • Seamless, fully-adhered elastomeric membrane

THERMO-FLEX 750FS (Acrylic Coating)

Thermo-Flex 750FS acrylic roof coating is a fluid-applied, fast-set acrylic elastomeric coating designed to enhance energy savings and water resistance, thereby protecting the assets and increasing the longevity of the structure.

  • Superior exterior durability and UV light resistance
  • Severe Hail Rated with LPA Roofing Foam and Coating System
  • Seamless, fully-adhered elastomeric membrane

THERMO-FLEX 750QS (Acrylic Coating)

Thermo-Flex 750QS acrylic roof coating is a fluid-applied, quick-set acrylic elastomeric coating designed to enhance energy savings and water resistance, thereby protecting the assets and increasing the longevity of the structure. It is formulated using advanced all-acrylic polymer technology for application over spray polyurethane foam applications. 

  • Superior exterior durability and UV light resistance
  • Severe Hail Rated with LPA Roofing Foam and Coating System
  • Seamless, fully-adhered elastomeric membrane

THERMO-FLEX 1000 (Acrylic Coating)

Thermo-Flex 1000 acrylic roof coating is an acrylic elastomeric fluid-applied coating designed to enhance energy savings and water resistance, thereby protecting the assets and increasing the longevity of the structure. It is formulated using advanced all-acrylic polymer technology for application over spray polyurethane foam applications and withstands intense heat and ultraviolet rays in humid climates. 

  • Provides a seamless umbrella over new and existing roof substrates
  • Best insulation value per inch
  • 100% Adhesion

THERMO-FLEX 1000FS (Acrylic Coating)

Thermo-Flex 1000FS acrylic roof coating is a fluid-applied, fast-set acrylic elastomeric coating designed to enhance energy savings and water resistance, thereby protecting the assets and increasing the longevity of the structure. It is formulated using advanced all-acrylic polymer technology for application over spray polyurethane foam applications.

  • Provides a seamless umbrella over new and existing roof substrates
  • Best insulation value per inch
  • 100% Adhesion

THERMO-FLEX 1000QS (Acrylic Coating)

Thermo-Flex 1000QS acrylic roof coating is a fluid-applied quick-set acrylic elastomeric coating designed to enhance energy savings and water resistance, thereby protecting the assets and increasing the longevity of the structure. It is formulated using advanced all-acrylic polymer technology for application over spray polyurethane foam applications.

  • Provides a seamless umbrella over new and existing roof substrates
  • Best insulation value per inch
  • 100% Adhesion

THERMO-FLEX 1500HT (Acrylic Coating)

Thermo-Flex 1500HT is a technologically advanced, high solids, fire retardant, thixotropic, acrylic elastomeric coating uniquely formulated for the protection of polyurethane foam insulation. It is a premium quality high tensile formulation that also withstands the damp heat and ultra-violet rays of humid environments.

  • Superior exterior durability and UV light resistance
  • Provides a seamless umbrella over new and existing roof substrates
  • Severe Hail Rated with LPA Roofing Foam and Coating System

THERMO-CAULK (Acrylic Caulk)

Thermo-Caulk is designed from 100% acrylic resins. It is a single component, water-based, high-performance elastomeric sealant. It is a knife-grade caulking that when cured forms a tough, flexible membrane that seals out moisture.

  • Waterproof
  • Easy to apply
  • Tenacious adhesion

THERMO-PRIME (Acrylic Primer)

Thermo-Prime™ acrylic roof primer is a single component, water-soluble acrylic primer that promotes adhesion of spray-in-place polyurethane foam to a variety of roofing substrates including BUR, modified bitumen, concrete, masonry, galvanized metal and wood.

WALL-LOK

WALL-LOK is a high-fill thick elastomeric coating and sealer that is flexible and stretchable. This makes it
ideal for bridging non-structural cracks and defective joints from a hairline crack up to 1/16” wide.

  • 10 times thicker than ordinary paint
  • Provides a waterproof barrier to any exterior surface
  • Contains reflective material that shields the building from harmful UV rays

HARD-LOK

Huntsman Building Solutions HARD-LOK cementitious roof coating system provides building owners a fully adhered monolithic roofing system, ideal for low slope or flat roofs and use in moderate to extreme desert environments.

  • Prevents degradation to roofing by normal weathering, aging and ultraviolet exposure
  • Fast drying, odor-free and environmentally safe
  • Ideal heavy-duty cool roofing solution

Brochures | 3-Part CSI specifications

Brochures for Roofing Coatings

Brochures for Roofing Coatings
Preview Description Format Size Open
Benefits of specifying Huntsman Building Solutions’ products
The industry’s finest building science & engineering support, Setting new industry standards for life/safety and commercial fire testing, Immediate availability of HBS field technicians for jobsite meetings and troubleshooting, World’s largest network of approved applicators, [...]
PDF   Open
Tech Library
HBS's technical library is the primary source for any and all CC-ES evaluation reports, Product data, Technical data sheets, Safety data sheets, Application guides, Warranties, Installation statements and Specifications.
    Open

3-Part CSI specifications for Roofing Coatings

3-Part CSI specifications for Roofing Coatings
Description Format Size Download
Specifications
To find the documents you need on any of our spray foam insulation or coating products, simply click on the product link, or use the search feature.
doc/rtf/pdf   Download


Request for Information / Request a Catalog from Huntsman Building Solutions about Roofing Coatings
 
(Please check companies and/or products above.)
 
*Name:    
*Email:    
Company:    
*Type:    
Phone:    
*Address:    
*Request:    
    (* = Mandatory field) 
Please add me to the mailing list for the free monthly e-Newsletter AECnews.  
     


07 21 29 - Sprayed Insulation
07 22 00 - Roof and Deck Insulation
07 56 00 - Fluid-Applied Roofing
07 57 00 - Coated Foamed Roofing