|
News
Formerly NECT-90 is now NawTone Acrylic Masonry Stain
|
Subscribe to FREE newsletter
| May 28, 2017 |
NawTone Acrylic Masonry Stain (formerly NECT-90) is a hydrous, multiple polymer formulation of resin solids, color pigments and a specially formulated tint base, combined to achieve a wide range of colors designed to exhibit the overall characteristics of being: light fast, UV resistant, penetrating, aspiratory, and quick drying, while being mold, mildew, fungus and weather resistant.
We customize the application and the degree of translucency to meet the aesthetic requirements while always maintaining a natural look. This product can be applied in color densities from a wash of faint color through to full opacity.
Features:
- NawTone Emulsion Color Treatment is our most versatile stain
- Use on masonry or concrete for corrective color or total color change
- Water-based for easy use and clean up
- Semi-transparent; Achieve precise color saturation while allowing natural textures to show through
- Apply with brush, sponge, roller or spray
- Low VOC, non-toxic
NawTone is used for matching additions, historic preservation, complete color changes, decorative applications and solving color problems in masonry and concrete.
NawTone is ideal for matching masonry colors. It can be used on brick, block, mortar, stucco, EIFS, and concrete surfaces.
Environmental & Safety Concerns
NawTone is water based, nonflammable, non-hazardous and has very low VOC content.
Application
- Verify that any masonry, concrete, stucco walls that have been treated with any form of chemical/acid wash are neutralized.
- Verify that masonry, concrete, stucco, in existing building are structurally sound and fully intact.
- Alkali or efflorescence should be treated with proper neutralizing compounds as recommended by masonry supplier before application can begin. Walls must have a neutral pH for product warranty to be in effect.
- NawTone can be applied in temperatures of 25°-110°F (3.8°-43.3°C). Masonry surfaces should be dry before work begins.
- Applied by spray, roller and hand applications depending on the desired finish.
200-400 sq. ft. per gallon (60-120 m2/liter) depending on the absorbency of the substrate.
Warranty
NawTone(NECT-90), when applied by Nawkaw and Nawkaw Accredited Applicators, carries a limited 25-year warranty. This warranty is a full service warranty and is not limited to supply of replacement product.
Nawkaw Corporation carries a wide variety of masonry related products.
For other relevant searches, you might want to try: