Door Safety from Miller Edge

Other News   Subscribe to FREE newsletter

Jan 23, 2024

Custom designed wired and wireless pressure activated sensing devices and non-contract infrared sensors for virtually any style of commercial/industrial door.

BEA Eagle HM
The High Mounting Eagle Motion Detector (PN: 10EAGLE1HM) nd technology combined with digital processing to assure a sharp, stable activation pattern with outstanding adjustability.

BEA Falcon
The Falcon’s state-of-the-art microprocessor and flat antenna provide the ability to disregard pedestrians and only allow large masses (such as trucks and forklifts) to be detected-even at lower mounting heights.

BEA FlexIR
The FlexIR is a light beam flexible mounting bracket that prevents BEA's Microcell system from damage when installed away from the door Jamb surface.

BEA Matrix2-S
With more standard features than any other loop detector on the market, the Matrix2-S has the flexibility, compatibility and performance to maximize productivity and safety on your site.

MC22
For installation on rolling doors or grilles with accepting bottom bar profile, simply slide out existing weather seal and slide in MC22.

ME103
This touch sensitive switch can be adapted to suit a wide variety of applications. It is manufactured to user specifications for length, sensitivity and outlet location. When touched lightly or at an angle, the ME103 sends an immediate signal to stop, start or reverse operations depending upon your particular application. Multiple mounting channel designs allow for easy installation on nearly any surface.

ME110
For installation on light-weight grille and shutter applications with minimal over-travel. Use on or near gates for pinch point protection.

ME111
For installation on barrier gate arms, attach the rigid PVC mounting channel and slide sensor into the channel.

ME112
The ME112 is designed for use on doors up to 1-1/4 inches thick. To install; slide the edge into the mounting channel and then mount the assembly to the door.

ME113
The ME113 is designed for use on 1-1/4 to 1-1/2 inch thick doors and gates. To install; slide the edge into the mounting channel and then mount the assembly to the door.

ME116
Minimal care is required for the ME116 since it is manufactured with only the most durable materials and the highest quality control standards. However, SensingEdges must be examined once per month for cuts or punctures which could damage internal components.

ME117
This pressure sensitive electric edge can be adapted to suit a wide variety of applications. When touch activated, the ME117 sends an immediate electrical signal to controls to stop and/or reverse operations. With appropriate mounting channel, this edge will fit nearly all doors from 1” to 2” thick. A variety of mounting channels are available for easy installation on machinery applications. The ME117 is resistant to flame, water, and most common greases and oils.

ME120
The ME120 is designed for use on doors and gates up to 1-1/2 inches thick. To install, simply attach the rigid PVC or aluminum mounting channel and slide sensor into the channel.

ME123
The ME123 is designed for use on 1-1/2 to 2 inch thick doors and gates. To install, slide the edge into the mounting channel and then mount the assembly to the door.

ME146
Alumaglas® Contact Elements cover the entire surface virtually eliminating any dead zones in the active surface. Alumaglas® will not rust or dent. It is completely flexible enabling it to bounce back from impacts without dents which could damage other rigid contact elements.

MGO20
The MGO20 is designed for use on doors and gates up to 1-1/2 inches thick. To install, simply attach the rigid PVC or aluminum mounting channel and slide sensor into the channel. This edge cannot be bent or folded.

MIR-T1
The Patriot Telescopic Non-Contact SensingEdge is manufactured to work with Rapid Roll and Sectional Doors. The system consists of a Control Unit, Emitter Eye and a Receiver Eye which simply mounts into a rigid steel, spring loaded retracting arm. The arms are mounted to the bottom of the door and extend below the leading edge of the door, thus providing an invisible infrared beam of protection. If the beam is blocked by an object or person below the door, the control unit signals the door operator to stop and/or reverse.

MIR-Z1
The Patriot Z-Flap Non-Contact SensingEdge is manufactured to work with Rolling Steel and Sectional Doors. The system consists of a Control Unit, Emitter Eye and a Receiver Eye which simply mounts into a flexible molded Z-Flap mounting bracket made of Dupont Hytrel®. The Z-Flaps are mounted to the bottom of the door and extend below the leading edge of the door, thus providing an invisible infrared beam of protection. If the beam is blocked by an object or person below the door, the control unit signals the door operator to stop and/or reverse.

MR130
Easily retrofits for use on sectional or one-piece garage doors with any brand of automatic opener. AdvantEdge™ offers homeowners true door-to-floor entrapment protection.

MT21
The low profile MT21 is flame retardant and will not release harmful gases or fumes. This edge mounts directly to doors with accepting double L-angle bottom bars.

MT22
The MT22 mounts directly to doors with accepting double L-angle bottom bars. No mounting channel required.

MU Bumper
Ideal for doors over 2 inches thick. Let us fully customize this SensingEdge to meet your exact specifications for sensitivity, height, width and compensate for over-travel. The flexible flaps wrap around the bottom of the door for direct mounting. Try aluminum or wood trim to give a "finished look".

MU21
The low profile MU21 allows for minimal over-travel. The mounting flaps wrap around the bottom of the door for direct mounting. Try aluminum or wood trim to give a "finished look".

MU22
Ideal for 1-3/4 to 2 inch thick doors. The flexible flaps wrap around the bottom of the door for direct mounting. Try aluminum or wood trim to give a "finished look".

MWCK02
The Miller Edge Model MWCK02 gate and door edge transmitter and receiver kit is designed to provide a fully reliable, self-checking communication between the 4-wire SensingEdge and the door or gate motor operator. When the SensingEdge detects an obstruction, a fault condition is communicated to the transmitter and the receiver. The signal is then passed on to the motor operator to control the motion of the door or gate.

MWR02
Both the Miller Edge receiver and transmitters are designed to have several selectable options not found on other radio controls. Simply select these options with the convenient dip switches and wire harness. The receiver will operate on either 12 or 24 volt AC or DC and is capable of sending a pulse or continuous signal.

MWR03
Both the Miller Edge receiver and transmitters are designed to have several selectable options not found on other radio controls. Simply select these options with the convenient dip switches and wire harness. The 3-channel receiver will operate on either 12 or 24 volt AC or DC and is capable of sending a pulse or continuous signal.

MWT02
The Miller Edge Model MWT02 gate and door edge transmitter is designed to provide obstacle sensing protection for a variety of motorized gates and doors.

MWTA02
The Miller Edge Model MWTA02 gate and door edge transmitter is designed to provide obstacle sensing protection for a variety of motorized gates and doors. The Model MWTA02 is available with an Audible Alarm feature that activates when the battery has only 25% of its life remaining, indicating the battery should be replaced.

@MillerEdge #MillerEdge #gatesafety

For other relevant searches, you might want to try: