Accessories > Xypex Megamix Series

Megamix I
Megamix II
Megamix II + Bio-San

Megamix I & II is a repairing mortar specifically for the waterproofing and resurfacing of deteriorated concrete surfaces, whereas Megamix II + Bio-San is specifically formulated for restoration of concrete damaged by microbial induced corrosion, abrasion/erosion and chemical attack.

Xypex Megamix I is a thin parge coat for the waterproofing and resurfacing of vertical masonry or concrete surfaces, as a cap coat for Xypex Concentrate, or as an architectural rendering. Megamix I is a unique blend of Portland cement, treated silica sand, fibers and proprietary chemicals. It is mixed with Xycrylic Admix to produce enhanced bond. Megamix I is applied by brush or trowel up to a thickness of 3/8 in. (10 mm).

Xypex Megamix II is a thick repair mortar for the patching and resurfacing of deteriorated concrete. Megamix II has been specifically formulated to produce superior bond, low shrinkage, chemical durability and high strength. It is a one component mortar and can be either sprayed or trowel applied at a thickness of 3/8" - 2" (10 - 50 mm).

Xypex Megamix II + Bio-San is a resurfacing mortar specifically designed for the restoration of deteriorated concrete surfaces caused by microbial induced corrosion, abrasion/erosion and chemical attack. It is formulated for ease of application, superior bond, low shrinkage, high strength and resistance to microbial, acid and sulphate attack. Megamix II + Bio-San contains bioactive mineral solids which fix permanently within the repair mortar matrix impairing bio-film formation, thus limiting microbial induced corrosion of the repaired surface in sewer environments. It significantly extends the life of sewer and waste water infrastructure by inhibiting the growth of acid causing sewer bacteria such as Thiobacillus that cause MIC (microbial induced corrosion). In most applications, such as manhole resurfacing, Megamix II + Bio-San can be used to replace epoxy linings and calcium aluminate repair mortars.

Recommended for:

Megamix I

• Waterproof coating for vertical concrete block surfaces and cast-in-place concrete walls 
• A secondary or cap coat for Xypex Concentrate applications to porous masonry surfaces
• Lining for swimming pools, tunnels and tanks

Megamix II for rehabilitation

• Water Tanks and Reservoirs 
• Sewage Treatment Plants
• Concrete Water and Sewer Pipes 
• Manholes and Vaults 
• Marine Structures
• Bridge Structures 
• Tunnels and Parking Garages

Megamix II + Bio-San for rehabilitation

• Manholes / Sewer Pipes
• Pump and Lift Stations
• Head Works
• Septic Tanks
• Digesters
• Clarifiers
• Industrial Structures

Advantages

Megamix I 

• Excellent adhesion and bond to concrete substrates
• Easy to apply
• Fiber reinforced 
• Reduces surface absorption
• Provides good surface for painting or as a final finished surface
• NSF 61 certified

Megamix II

• Excellent adhesion and bond to concrete substrates 
• Low shrinkage, fiber reinforced
• Lowchloridepenetration 
• Ready to use – just add water
• Vertical and overhead concrete repair; sprayable 
• VOC compliant 
• NSF 61 certified

Megamix II + Bio-San

• Excellent adhesion and bond to concrete substrates
• Inhibits microbial induced corrosion
• Low shrinkage, fiber reinforced
• Resistant to acid attack
• Very resistant to severe sulphate exposure
• Highly resistant to chloride diffusion
• Ready to use – just add water
• Vertical and overhead concrete repair; sprayable 
• Does not contain any VOCs
• CE certified meeting EN 1504-3