|
News
Portable LED Perimeter Lighting Retrofit for Construction Sites - CAST Lighting and Penn State Case Study
|
Subscribe to FREE newsletter
| Dec 12, 2013 |
The Pennsylvania State University undertook, as part of their Greenhouse Gas Reduction Initiative, the conversion of campus construction perimeter lighting from a traditional type to a new energy-efficient LED fence lighting solution. The new solution, the CAST Lighting LED Perimeter Lighting System (winner of 7 security and lighting industry awards) resulted in an 87% savings in electrical consumption.
CAST Lighting, a premier manufacturer of outdoor security and landscape lighting systems, released today a case study of the successful conversion of a traditional construction site lighting system to a new LED system. The site of the conversion was the campus of the Pennsylvania State University (Penn State) in State College, PA.
Most institutions (like Penn State) seek many avenues to reduce energy consumption. This was the primary goal when the university and its partner, Massaro Construction Management, sought an energy-efficient solution to provide security lighting for perimeter fences around construction areas. The previous lighting solution was inefficient and problematic in several ways. The new solution, CAST Lighting’s award-winning LED Perimeter Lighting System promised to satisfy all the security and safety needs while supporting the university’s Greenhouse Gas Reduction Initiatives.
Need:
An energy-efficient and effective portable lighting system to illuminate perimeter fences around University campus construction areas.
Background:
Massaro Construction Management Services, LLC., a construction management company, was hired for a number of construction projects on the campus of The Pennsylvania State University in State College, PA. Temporary chain-link fences with driven postswere installed around the perimeters of all construction areas by Massaro’s subcontractor, John Nastase Construction. Some perimeters were adjacent to high-traffic walkways; others were located in garden or lawn areas. Both situations necessitated lighting to enhance security and safety.
Massaro typically used 120-volt work lights strung along fences, mounted by hooks – each one protected in a glass-enclosed cage. This type of lighting presented many problems – only one side of fence could be illuminated, glass enclosures were subject to breakage, energy consumption was high, and 120-volt currents presented a safety risk.
Solution:
CAST Lighting, a low-voltage lighting manufacturer, supplied a CAST LED Perimeter Lighting System customized with quick-connects so lights could be rapidly deployed and moved to accommodate temporary fencing needs.
This system, introduced in 2012, won 7 security and lighting industry awards including “The Most Innovative Product of the Year” (LightFair 2012) and awards from ASIS, Security Sales and Integration, Architectural Products, Architectural SSL, and others.
The unique features of the system include how it is mounted, its energy-efficiency, its highly targeted light output, its fast installation, and durability.
Implementation:
CAST Lighting provided (93) LED Perimeter Lights – each with a quick connect plug. These lights were designed to be mounted every 20 feet (every other vertical fence post) along temporary chain link fencing. Long wire pieces were provided with quick-connects every 20 feet to connect the fixtures to the 24-volt power supply. Wires were affixed to fences with removable cable ties. Two CAST Lighting Perimeter transformers supplied power to the entire system. On/Off times were controlled with a built-in timers and photocells.
In total, 1,860 ft. of temporary fencing was illuminated with the system.
Total installation time with a 4-man crew was less than 4 hrs.
Results:
There were several problems to be addressed:
- Labor: 80% savings. The entire system of (93) lights and two power supplies were installed by a 4-man crew in less than four hours. While direct labor savings could not be measured, similar projects show a labor savings of as much as 80% compared to 120-volt perimeter lighting systems.
- Flexibility: Construction fencing is often deconstructed and moved to other locations. Once CAST Lights are attached to the fence, they can be quickly disconnected from power wires, and fence sections can be removed and reassembled elsewhere. Then the wires can be attached to the fixtures – a fast process that does not require an electrician.
- Illumination Pattern: Previous system only lit one side of fence. New system fixtures are mounted directly above fence posts so light distribution is equal on both sides – greatly enhancing security.
- Durability: Previous system lights were enclosed in glass and mounted on side of fence and subject to breakage. New system fixtures have extremely durable cast construction and are mounted high above fence to prevent abuse. New system fixture housings carry lifetime warranty.
- Energy Consumption: 87% savings. Previous system used 27-watt CFL’s mounted every 10 ft. along fence. New system uses 7-watt LED’s mounted every 20 feet. Cost per fence-foot reduced from 2.7 w/ft. to 0.35 w/ft. or an 87% energy savings.
- Safety: Previous system used 120-volt lights with standard plugs and sockets. The risk of electrical shock (from mounting these fixtures on a metal fence) was very high. New system’s use of 24 volts ensures that there is no risk of electrical shock injury (30 volts is the recognized safety limit).
Testimonials
From Construction Manager:
“From a construction perspective, I have been impressed and pleased with the Cast Lighting installed on our project at Penn State. The easy installation and the amount of light provided on both sides of the perimeter fences have made our site safer and more secure than ever. I have also been amazed with the low energy cost associated with the product which is a benefit to the owner. With a greater demand for Green Building in our industry, it’s nice to start a project off with leading by example, using less energy throughout our work – starting with our perimeter fence lighting.” (Jim Kephart, Site Manager, Massaro Construction Management, LLC.)
The CAST LED Perimeter Lighting System resulted in an 87% energy savings.
From University Project Manager:
“The Pennsylvania State University is strongly committed to energy conservation and this project supports the Office of Physical Plant Green House Gas Reduction initiatives. The ease of installation, portability to other jobs sites, increased illumination levels, enhanced safety and security, all at reduced energy consumption makes this type of application a win-win for everyone involved.” (Jeff Kokoskie, PE; Manager, Construction Services; The Pennsylvania State University)
Conclusion:
All prior problems were successfully addressed by the new CAST Portable LED Perimeter Lighting System. Construction personnel from Penn State’s Office of Physical Plant expressed high praises for the lights. They not only appreciate the specific issues addressed above, they also like the daytime appearance of the lights, and the glare-free people-friendly illumination at night.
About CAST Lighting:
CAST Lighting is a premium manufacturer of low voltage landscape and security lighting. Known for extreme durability and advanced LED integration, CAST Lighting is passionate about providing professional lighting tools for passionate lighting professionals. More info at http://www.cast-lighting.com.
About Massaro Construction Management Services:
As the owner’s partner and advocate in the building process, Massaro Construction Management Services, LLC. provides the depth of experience and expertise in design, estimating, and field operations necessary to ensure every construction project is a success. More info at http://www.massarocms.com.
For other relevant searches, you might want to try: