Industrial Safeguarding Products

Custom designed sensing mats and signaling strips, utilizing a patented flexible contact element, provide enhanced machine safeguarding for every application.

GuardianMat®

ME151
(Black Ribbed Top, Yellow Ribbed Top, Diamond Top)
For nearly 60 years MillerEdge has set the industry standards for quality and performance of industrial automation safeguarding. Our unique manufacturing process allows us to produce custom sizes and shapes, while maintaining on-time deliveries.

Sensing Edges

ME110
For installation on light-weight grille and shutter applications with minimal over-travel. Use on or near gates for pinch point protection.

ME120
The ME120 is designed for use on doors and gates up to 1-1/2 inches thick. To install, simply attach the rigid PVC or aluminum mounting channel and slide sensor into the channel.

MGO20
The MGO20 is designed for use on doors and gates up to 1-1/2 inches thick. To install, simply attach the rigid PVC or aluminum mounting channel and slide sensor into the channel. This edge cannot be bent or folded.

ME123
The ME123 is designed for use on 1-1/2 to 2 inch thick doors and gates. To install, slide the edge into the mounting channel and then mount the assembly to the door.

MGR20
The MGR20 is designed for use on 2 inch round gates. To install, simply attach with screws through mounting tabs and into gate. This edge cannot be bent or folded.

MGS20
The MGS20 is designed for use on 2 inch square gates. To install, simply attach with screws through mounting tabs and into gate. This edge cannot be bent or folded.

Controllers

FSIS-25-4
Intrinsically safe controller for use with mats and SensingEdges in hazardous locations.
Size: 10” H x 7 1/2” W x 7” D
Response time: <0.020 sec. calc.
Power input: 120 VAC + 10% - 15%
Enclosure: Explosion proof NEMA 3,4,7 & 9

RT6
Detachable Terminal Block 5 Input Config; single or dual channel modes hardwire selectable Approved Category 4 Safety Device
Power: 24VDC or 115VAC
Oper. Temp: -10º C to +55º C

MFSC-100
(Fail Safe Controller) Not to be used for control reliable conditions
Size: 6.62” x 1.75” x 2.38”
Response time: <6 milliseconds
Power input: 24VAC + 10%
Reset: Front panel button
Enclosure: NEMA 4X

FSC-57
Din Rail Controller mounted in a NEMA 13 Metal Enclosure
Size: 4.30 x 6.30 x 6.30
Operating Temp: -10º C to +55º C
Input Config: 5 (single and dual channel modes hardwire selectable) Approved Category 4 Safety device.

FSID-35-4
Input: 4-Wire GuardianMat® (up to 4 mats)
Output: 1 SPDT output
Output Relay: Switching Amplifier
Output Relay Approvals: FM, UL, CSA, PTB, SEV
Output Contacts: 4A@ 250VAC, 4A@24VDC
Mechanical Life: 107 Operations
Response time: Energization (input-output) <20 msec. Power input: 120VAC +10% - 15%
Power Consumption: <40mA @ 120VAC
Enclosure: Explosion Proof, NEMA 4,7 & 9 (IP66) - 7 3/4” h x 5 3/4” w x 5 3/4”d
Approved for hazardous locations NEMA Class I - Groups B,C, &D - Class II - Groups E,F, &G - Class III
Operating Temperature: -13ºF to 140ºF (-25ºC to 60ºC)

News

News
Preview	Summary	Date
	Machine Guarding Mats from Miller Edge When a down force is applied to the surface of the mat, the two Alumaglas contact elements meet sending a stop signal to a controller. A separate reset button should be located in a safe area. The ME151 Guardian Mat is not intended to continuously dete...	Nov 08, 2024