architecture - engineering - construction
AECinfo.com

Integrated Expansion Board Cap Waterstop Systems

 

Integrated Expansion Board Cap Waterstop Systems

Integrated expansion board cap waterstop systems are designed to replace post-applied joint sealant, and provide a fluid-tight internal seal like a traditional waterstop with a one-step, integrated unit. Install Earth Shield® expansion board cap waterstop on top of conventional expansion board filler or Earth Shield’s chemical resistant, plastic expansion board.

The expansion board acts as the form; therefore, no form splitting is necessary, significantly accelerating the project schedule and provides a long-lasting, attractive finished concrete joint. Earth Shield® screed key cap slides over the top of the metal screed key, eliminating the need for sealant.

Like all our thermoplastic vulcanizate waterstops, Earth Shield® integrated cap system waterstop can be heat-welded using a standard waterstop splicing iron allowing for easy field fabrications and allows the waterstop to function as a continuous, homogeneous, fluid-tight diaphragm.

Waterstop directional changes are available along with straight roll stock. Custom, fit-to-print waterstop modules are produced to order. Prefabricated ells, tees, tank pads, column fittings, and many others are in stock and ready to ship.

Earth Shield® Integrated Expansion Board Cap Waterstop is available for 1/2" (JPEB350) and 3/4" (JPEB375) expansion filler board.

Installation is simplified for the contractor in the field, as form splitting is unnecessary.

@waterstopking #waterstopking #waterstop #dewalt #concrete

For other relevant searches, you might want to try:

(03160) Waterstop
(07920) Joint Sealant
(03 10 00) Concrete Forming and Accessories
(03 11 00) Concrete Forming
(03 11 23) Permanent Stair Forming
(03 15 00) Concrete Accessories
(03 15 13) Waterstops
(04 05 19) Masonry Anchorage and Reinforcing
(04 05 23) Masonry Accessories
(06 05 23) Wood, Plastic, and Composite Fastenings
(06 50 00) Structural Plastics
(06 70 00) Structural Composites
(07 11 00) Dampproofing
(07 11 13) Bituminous Dampproofing
(07 11 16) Cementitious Dampproofing
(07 11 19) Sheet Dampproofing
(07 13 00) Sheet Waterproofing
(07 13 13) Bituminous Sheet Waterproofing
  (07 13 26) Self-Adhering Sheet Waterproofing
(07 13 52) Modified Bituminous Sheet Waterproofing
(07 13 53) Elastomeric Sheet Waterproofing
(07 13 54) Thermoplastic Sheet Waterproofing
(07 14 00) Fluid-Applied Waterproofing
(07 14 16) Cold Fluid-Applied Waterproofing
(07 15 00) Sheet Metal Waterproofing
(07 26 00) Vapor Retarders
(07 26 13) Above-Grade Vapor Retarders
(07 26 16) Below-Grade Vapor Retarders
(07 62 00) Sheet Metal Flashing and Trim
(07 63 00) Sheet Metal Roofing Specialties
(07 65 13) Laminated Sheet Flashing
(07 65 16) Modified Bituminous Sheet Flashing
(07 92 00) Joint Sealants
(09 21 00) Plaster and Gypsum Board Assemblies
(13 30 00) Special Structures
(43 32 00) Gas and Liquid Purification Process Equipment