|
About Insul-Tek® PVC
Insul-Tek® PVC
Preinsulated piping systems for above and below ground use on systems involving low temperatures.
Typical Uses:
Insul-Tek® PVC System is a totally factory fabricated, insulated and jacketed piping system supplied in 20 FT. lengths. Virtually all types and grades of PVC carrier pipe can be utilized within our INSUL-TEK® PVC system including Gosketed Bell and Spigot joint as well as solvent weld type joint. The use of the gasketed bell joint PVC carrier pipe offers the distinct advantage of accommodating for expansion and contraction within a piping system therefore eliminating the need for costly expansion devices.
The low initial cost of this system coupled with relative ease of installation and resultant low installation costs make it the ideal choice for many low temperature applications.
The standard casings for below ground use are PVC and HDPE. The spiral lockseam galvanized steel and aluminum casings are normally utilized on above ground systems. However, optional casings ore available. Please consult the Casing Selection Guide for additional information.
Insul-Tek® PVC
Source: http:
22 07 16 - Plumbing Equipment Insulation
23 07 19 - HVAC Piping Insulation
23 11 13 - Facility Fuel-Oil Piping
26 01 40 - Operation and Maintenance of Electrical and Cathodic Protection Systems
26 06 40 - Schedules for Electrical and Cathodic Protection Systems
26 40 00 - Electrical and Cathodic Protection
26 42 00 - Cathodic Protection
26 42 13 - Passive Cathodic Protection for Underground and Submerged Piping
26 42 16 - Passive Cathodic Protection for Underground Storage Tank
33 50 00 - Fuel Distribution Utilities
33 51 00 - Natural-Gas Distribution
33 51 13 - Natural-Gas Piping
33 52 00 - Liquid Fuel Distribution
33 52 13 - Fuel-Oil Distribution
33 52 16 - Gasoline Distribution
33 52 19 - Diesel Fuel Distribution
33 52 43 - Aviation Fuel Distribution
33 61 00 - Hydronic Energy Distribution
33 61 13 - Underground Hydronic Energy Distribution
33 61 23 - Aboveground Hydronic Energy Distribution
33 61 33 - Hydronic Energy Distribution Metering
33 63 00 - Steam Energy Distribution
33 63 13 - Underground Steam and Condensate Distribution Piping
33 63 23 - Aboveground Steam and Condensate Distribution Piping
40 11 13 - Low-Pressure Steam Process Piping
40 11 16 - Intermediate-Pressure Steam Process Piping
40 11 23 - Condensate Process Piping
40 21 23 - Fuel-Oils Process Piping
40 21 23.13 - No. 2 Fuel-Oil Process Piping
40 21 23.16 - No. 4 Fuel-Oil Process Piping
40 21 23.19 - No. 5 Fuel-Oil Process Piping
40 21 23.23 - No. 6 Fuel-Oil Process Piping
40 41 00 - Process Piping and Equipment Heat Tracing
40 41 13 - Process Piping Heat Tracing
40 41 13.13 - Process Piping Electrical Resistance Heat Tracing
40 41 13.16 - Process Piping Electrical Conductance Heat Tracing
40 41 13.19 - Process Piping Gas Heat Tracing
40 41 13.23 - Process Piping Steam Heat Tracing
40 41 13.26 - Process Piping Thermal Fluids Heat Tracing
40 41 23 - Process Equipment Heat Tracing