architecture - engineering - construction
AECinfo.com

About Waterstop Profiles

3-Part CSI specifications  

Waterstop Profiles

Waterstop Profiles

Ribbed Centerbulb Waterstop

Ribbed Centerbulb Waterstop

JP436, JP636, JP936, JP638, JP938, PVC401, PVC436, PVC438, PVC601, PVC605, PVC636, PVC638, PVC905, PVC936, PVC938, PVC939, PVC940

Ribbed centerbulb is the most versatile type of waterstop available. The centerbulb accommodates lateral, transverse, and shear movement. Ribbed centerbulb waterstops function in expansion, construction, and control joints. They also provide superior anchoring abilities and a long fluid-flow path because of the multiple ribs on the exterior flanges. Under stress, the many ribs will distort less than a dumbbell type waterstop because the pressure is first applied to the inward-most anchoring rib, and decreases to the subsequent ribs. The centerbulb allows for joint movement beyond the ultimate elongation of the material, without distorting the anchoring ribs. All of our ribbed centerbulb waterstops have large outer diameter centerbulb. This centerbulb, coupled with the outstanding mechanical properties of our elastomers (ultimate elongation, tensile strength, etc.), provides for unsurpassed joint movement and sealing abilities. Like all our thermoplastic waterstops, Earth Shield® ribbed centerbulb waterstop can be heat-welded using a standard waterstop splicing iron, allowing for easy field fabrications and allows the waterstop to function as a continuous, homogeneous, fluid-tight diaphragm. Waterstop directional changes are available along with straight roll stock. Custom, fit-to-print waterstop modules are produced to order. Prefabricated ells, tees, tank pads, column fittings, and many others are in stock and ready to ship.

Retrofit Waterstop Systems

Retrofit Waterstop Systems

JP216L, JP320L, JP325T, JP336L, JP399T, JP450T, JP500, JP540L, JP621L, JPEB375R, PVC320L, PVC325T, PVC336L, PVC399T, PVC450T, PVC621L, PVC699T

Retrofit waterstop is designed to provide a fluid-tight seal between existing and new concrete construction, without resorting to the labor-intensive and structurally destructive saw-cut-and-grout method. It is ideal for constructing a new containment curb or wall to an existing slab or joining a new slab to an existing wall. Special profile fabrications are available for columns and pipe penetrations. All of our retrofit waterstops are sold as a complete system and include all the necessary stainless steel bars and bolts. We also offer a high-quality chemical resistant novolac epoxy — VEN 1000. Like all our thermoplastic waterstops, Earth Shield® retrofit waterstop can be heat-welded using a standard waterstop splicing iron, allowing for easy field fabrications, and enable the waterstop to function as a continuous, homogeneous, fluid-tight diaphragm. Waterstop change of directions can are available along with straight roll stock, and custom, fit-to-print waterstop modules are produced to order. Prefabricated ells, tees, tank pads, column fittings, and many others are in stock and ready to ship.

Integrated Cap Systems

Integrated Cap Systems

JPEB350, JPEB375, JPEB375R, JP158, JP1225

Integrated expansion board cap waterstop systems are designed to replace post-applied joint sealant, and provide a fluid-tight internal seal like a traditional waterstop with a one-step, integrated unit. Install Earth Shield® expansion board cap waterstop on top of conventional expansion board filler or Earth Shield’s chemical resistant, plastic expansion board. The expansion board acts as the form; therefore, no form splitting is necessary, significantly accelerating the project schedule and provides a long-lasting, attractive finished concrete joint. Earth Shield® screed key cap slides over the top of the metal screed key, eliminating the need for sealant. Like all our thermoplastic vulcanizate waterstops, Earth Shield® integrated cap system waterstop can be heat-welded using a standard waterstop splicing iron allowing for easy field fabrications and allows the waterstop to function as a continuous, homogeneous, fluid-tight diaphragm. Waterstop directional changes are available along with straight roll stock. Custom, fit-to-print waterstop modules are produced to order. Prefabricated ells, tees, tank pads, column fittings, and many others are in stock and ready to ship.

Special Shapes Waterstop

Special Shapes Waterstop

JP678, JP978, JP500, JP540L, JP621L, JP1225, PVC678, PVC978, PVC621L, PVC701, PVC702, PVC703, PVC710, PVC901

Earth Shield® tear web waterstops are for large joint movements such as tank foundations. Tear web is suitable for expansion joints. For construction and contraction (control) joints, install ribbed centerbulb instead. We also manufacture retrofit products specifically designed to accommodate large shear movements, such as tank ring foundations subjected to settlement.

All of our retrofits are mechanically adhered to the existing concrete using one of our chemical resistant, novolac epoxies (VEN500 or VEN1000), stainless steel batten bar, and stainless steel anchor bolts.

Other profiles include split waterstop and labyrinth.

Like all our thermoplastic waterstops, Earth Shield® can be heat-welded using a standard waterstop splicing iron allowing for easy field fabrications and enables the waterstop to function as a continuous, homogeneous, fluid-tight diaphragm. Waterstop directional changes are available along with straight roll stock. Custom, fit-to-print waterstop modules are produced to order. Prefabricated ells, tees, tank pads, column fittings, and many others are in stock and ready to ship.

Base Seal Waterstop

Base Seal Waterstop

JP206, JP211, JP215, JP216L, JP621L, PVC206, PVC211, PVC212, PVC215, PVC621L, PVC901

Base seal waterstop is ideal for flat pavement jobs such as runways and large containment slabs. Base seal waterstop is by far the easiest waterstop to install... Simply lay the waterstop directly on the compacted subgrade, place and finish concrete, and create control joint using a saw cut or another method. The base seal provides a permanent, life-of-structure seal at the bottom of the joint. Base seal is suitable for construction, contraction (control), and expansion joints. For sizeable hydrostatic head pressures (>50 foot) ribbed centerbulb should be used instead. Like all our thermoplastic waterstops, Earth Shield® base seal waterstop can be heat-welded using a standard waterstop splicing iron allowing for easy field fabrications and enable the waterstop to function as a continuous, homogeneous, fluid-tight diaphragm. Waterstop directional changes are available along with straight roll stock. Custom, fit-to-print waterstop modules are produced to order. Prefabricated ells, tees, tank pads, column fittings, and many others are in stock and ready to ship.

Dumbbell Waterstop

Dumbbell Waterstop

JP443, JP647, JP648, JP948, JP949, JP1149,PVC443, PVC647, PVC648, PVC910, PVC948, PVC949, PVC1149

Dumbbell waterstop is installed most often in below grade applications, with limited movement. Dumbbell waterstop works well in construction and contraction (control) joints; whereas, dumbbell centerbulb accommodates construction, control, and expansion joints. The large centerbulb (1-1/2” outer diameter) on the JP949 (and JP1149) waterstop profile, coupled with the outstanding mechanical properties of our thermoplastic elastomers and large endbulb anchors, enable the product to withstand large-scale joint movement (seismic or settlement). JP648, JP948, JP949, and JP1149 are all 3/8” thick... The largest and thickest profiles available in the industry! Like all our thermoplastic waterstops, Earth Shield® dumbbell waterstop can be heat-welded using a standard waterstop splicing iron allowing for easy field fabrications and enable the waterstop to function as a continuous, homogeneous, fluid-tight diaphragm. Waterstop directional changes are available along with straight roll stock. Custom, fit-to-print waterstop modules are produced to order. Prefabricated ells, tees, tank pads, column fittings, and many others are in stock and ready to ship.

Flat Strip Waterstop

Flat Strip Waterstop

JP635, JP637, JP937, PVC603, PVC635, PVC637, PVC937

Flat strip waterstop is installed most often in below grade applications, with limited movement. Flat strip waterstop functions in construction and contraction (control) joints. Both JP637 and JP937 are all 3/8” thick... The largest and thickest profiles available in the industry! Like all our thermoplastic waterstops, Earth Shield® flat strip waterstop can be heat-welded using a standard waterstop splicing iron allowing for easy field fabrications and enable the waterstop to function as a continuous, homogeneous, fluid-tight diaphragm. Waterstop directional changes are available along with straight roll stock. Custom, fit-to-print waterstop modules are produced to order. Prefabricated ells, tees, tank pads, column fittings, and many others are in stock and ready to ship.

3-Part CSI specifications for Waterstop Profiles

3-Part CSI specifications for Waterstop Profiles
Description Format Size Download
Safety Data Sheets
Safety Data Sheets (SDS) for Earth Shield Waterstop Products
  8 kB Download


Request for Information / Request a Catalog from JP Specialties, Inc. about Waterstop Profiles
 
(Please check companies and/or products above.)
 
*Name:    
*Email:    
Company:    
*Type:    
Phone:    
*Address:    
*Request:    
    (* = Mandatory field) 
Please add me to the mailing list for the free monthly e-Newsletter AECnews.  
     


02 24 13.43 - Water Assessment
03 10 00 - Concrete Forming and Accessories
03 11 00 - Concrete Forming
03 11 23 - Permanent Stair Forming
03 15 00 - Concrete Accessories
03 15 13 - Waterstops
04 05 19 - Masonry Anchorage and Reinforcing
04 05 19.13 - Continuous Joint Reinforcing
04 05 19.16 - Masonry Anchors
04 05 23 - Masonry Accessories
04 05 23.19 - Masonry Cavity Drainage, Weepholes, and Vents
07 11 00 - Dampproofing
07 11 13 - Bituminous Dampproofing
07 11 16 - Cementitious Dampproofing
07 11 19 - Sheet Dampproofing
07 13 00 - Sheet Waterproofing
07 13 13 - Bituminous Sheet Waterproofing
07 13 26 - Self-Adhering Sheet Waterproofing
07 13 52 - Modified Bituminous Sheet Waterproofing
07 13 53 - Elastomeric Sheet Waterproofing
07 13 54 - Thermoplastic Sheet Waterproofing
07 14 00 - Fluid-Applied Waterproofing
07 14 16 - Cold Fluid-Applied Waterproofing
07 15 00 - Sheet Metal Waterproofing
07 26 00 - Vapor Retarders
07 26 13 - Above-Grade Vapor Retarders
07 26 16 - Below-Grade Vapor Retarders
07 62 00 - Sheet Metal Flashing and Trim
07 63 00 - Sheet Metal Roofing Specialties
07 65 13 - Laminated Sheet Flashing
07 65 16 - Modified Bituminous Sheet Flashing
07 65 19 - Plastic Sheet Flashing
07 65 23 - Rubber Sheet Flashing
07 65 26 - Self-Adhering Sheet Flashing
32 12 13.16 - Asphaltic Tack Coats