JOMY Inc.
Balconies Specification Page - 1. CSI 3-Part Specifications.
JOMY BALCONIES SPECIFICATION GUIDE
This section is based on products distributed by the JOMY Safety Ladder Co., at the following address:
6255 Longbow Drive
Boulder, CO 80301
Telephone: (303) 527-2700
(800) 255-2591
Fax: (303) 527-2800
JOMY balconies are intended to supplement access to the JOMY safety ladder where required by code or other safety considerations.
PART 1. GENERAL
1.1. SECTION INCLUDES
| Access Balconies |
1.2 SUBMITTALS
| A. | Submit under provisions of Section 01300. |
| B. | Product Data: Provide manu-facturer’s standard details and catalog data demonstrating compliance with referenced standards. Provide installation instructions. |
| C. | Shop Drawings: Submit drawings illustrating layout and anchorage of balconies. |
| D. | Warranty: Submit manufacturer’s standard warranty. |
1.3 DELIVERY, STORAGE, HANDLING
| A. | Store products indoors and protect from moisture, construction traffic, and damage. |
| B. | Manufacturer’s standard warranty against defects in materials and workmanship; 10 year period. |
| C. | Shop Drawings: Submit drawings illustrating layout and anchorage of balconies. |
| D. | Warranty: Submit manufacturer’s standard warranty. |
1.4 WARRANTY
| A | .Manufacturer’s standard warranty against defects in materials and workmanship; 10 year period. |
PART 2. PRODUCTS
2.1 MANUFACTURER
| A | Provide products fabricated by the JOMY Safety
Products, Inc., 6255 Longbow Drive, Boulder, CO 80301. Telephone:: (303) 527-2700 (800) 255-2591 Fax: (303) 527-2800 |
2.2 MATERIALS
| A. | Balcony Frame: 6063-T6 aluminum alloy. |
| B. | Balcony Rails: Extruded aluminum, 6063-T6 alloy. |
| C. | Brackets: 6063-T6 aluminum, alloy. |
| D. | Pop Rivets, Bolts, Masonry Bolts, Fasteners: Stainless Steel |
| E. | Restraining Chain: Nylon coated filament. |
2.3 BALCONIES
| A. | Provide aluminum balconies at locations indicated on the drawings. |
| B. | Size: 24 x 42 inches, nominal (OR) 38 x 42 inches, nominal (OR) Custom size as indicated on the drawings. |
| C. | Rail: 42-inch 2 sides, restraining chain 1 side (OR) 42-inch 2 sides, pass-though gate 1 side. |
| D. | Capacity: 100 lbs. per sq. ft. |
2.4. ACCESSORIES
| A. | Provide brackets, spacers, etc., necessary for a complete installation. |
| B. | Contractor to provide fasteners for securement to wood construction: Stainless steel lag bolts; 3/8-inch diameter, 4-inch minimum embedment. |
| C. | Contractor to provide fasteners for securement to steel construction: Stainless steel bolts, nuts, and washers; 3/8-inch diameter. |
2.5 FINISHES
| A. | Aluminum: Clear anodized. |
| B. | Manufacturer’s standard shop-applied
enamel. 1. Color: As selected from manufacturer’s standards. 2. Color: Match paint sample supplied by architect. |
PART 3. EXECUTION
3.1 EXAMINATION
| A. | Verify that wall surfaces to receive units are complete and approved prior to installing work of this section. |
3.2 INSTALLATION
| A. | Install components in strict compliance with manufacturer’s instructions. |
3.3 ADJUST AND CLEAN
| A. | Remove debris; leave project site in clean and orderly condition. |