Panelfold Inc.  

Moduflex Series 400, 600, 800 Pocket Doors. CSI 3-Part Specifications.

OPERABLE WALLS

Moduflex® SERIES 400 * SERIES 600 * SERIES 800
Pocket Doors

PRODUCT SPECIFICATIONS: SECTION 10650 - OPERABLE WALLS

PART 1    GENERAL
(See Project Guide Specifications for Scope, Related Work, References, Submittals, Product Delivery and Acceptable Manufacturers paragraphs.)

PART 2    PRODUCTS

2.1    OPERABLE WALLS POCKET DOORS shall be manufactured by Panelfold, Inc., Miami, Florida, U.S.A. and installed by an authorized representative of the manufacturer in openings prepared by others to Moduflex! requirements.

2.2    OPERATION shall consist of a series of manually operated jamb-hinged panels matching the construction of the operable wall panels.

2.3    POCKET DOOR TYPE shall be as follows for areas indicated on the plans:

2.3.1    Bi-Fold Door
2.3.2    Double Door
2.3.3    3-Section Door
2.3.4    Single Door

2.4    POCKET DOOR PANELS shall be constructed as follows:

2.4.1    Series 400 shall be 3" (76) thick and Series 600 shall be 4" (102) thick. Panel faces shall be laminated to metal frames. Panels shall have appropriate internal insulation to achieve specified STC. Interlocking vertical panel edges shall be made of steel and shall not require trim thus minimizing the appearance of the vertical joining of the Sheer-Look® panels.
2.4.2    Series 800 shall be 4" (102) thick one piece, all steel construction. Continuous steel panel faces shall be invisibly welded to minimum 14 gauge (1.90) one-piece steel frames. Horizontal or vertical spiced frames or faces shall not be permitted. Interlocking vertical panel edges shall be made of steel and shall not require trim thus minimizing the appearance of the vertical joining of the SheerLook® panels.
2.4.3    Model 840 GWE shall be 3" (76) thick one piece, all steel construction with lightweight, impact resistant honeycomb core. Continuous Steel panel faces shall be invisibly welded to minimum 16 gauge (1.62) one-piece steel frames. Horizontal or vertical spliced frames or faces shall not be permitted. Interlocking vertical panel edges shall be made of steel. The vertical edges of the panels shall not require trim thus minimizing the appearance of the vertical joining of the Sheer-Look® panels.

2.5    PANELS shall be factory surfaced with one of the following (colors to be selected from manufacturer's standards):

2.5.1    Manufacturer's standard vinyl, Class A flame spread (specify Type I; or Type II).
2.5.2    Manufacturer's standard Ribtex®, vertical-rib wall carpeting, Class A minimum weight 21 oz. per lineal yard, fused bonded backing.
2.5.3    Manufacturer's Woventex®, panel fabric, Class A, acrylic backed.
2.5.4    Maharam Tekwall 1000 panel fabric, Class A acrylic backed.
2.5.5    Genuine unfinished wood veneer shall be (specify: White Ash, Red Oak, Natural Birch, American Walnut or other species as specified).
2.5.6    High pressure plastic laminate, vertial grade. (Series 400 and Series 600 only).
2.5.7    Customer's Own Material to be factory applied (subject to approval by the manufacturer for suitability to standard manufacturing processes and equipment).
2.5.8    Unsurfaced panel skins for field finishing by others.

2.6    HANGING WEIGHT of panels shall not exceed 8 lbs./ft2 (39.1 Kg/m2).

2.7    ACOUSTICAL RATING of panels as tested by an independent acoustical laboratory in accordance with ASTM E90-85 test procedures shall be (specify: Series 800, STC 49, Series 600 STC 45, Series 400, STC 38; or Model 840 GWE, STC 33).

2.8    SOUND SEALS shall be as follows:

2.8.1    Vertical seals between panels shall consist of deep nesting, universal interlocking ESP bronze steel astragals incorporating continuous, vinyl acoustical seals. Vertical astragal vinyl seals shall be installed on the outboard edges of the panel skins in a double row with an acoustical labyrinth.
2.8.2    Horizontal TOP and BOTTOM seals shall be continuous contact extruded vinyl shapes.

2.10    PANELS shall be hinged with manufacturer's standard butt-type hinges.

PART 3    EXECUTION (See Project Specifications Guide for Execution, Installation, Clearing and Demonstration paragraphs).

NOTE:    The ASTM - 84 procedure Class A flame spread and other test results referenced herein are for comparison purposes only and are not intended to reflect hazards presented by this or any other materials under actual fire conditions.

Panefold products are manufactured and sold under Panelfold®, Moduflex®, Startex�, Fabrictex®, Ropetex®, Woodtex®, Ribtex®, Woventex®, Sheer Look®, Autoseal� and Manuseal� trademarks and U.S. and Canadian patents worldwide. All dimensions shown in parentheses are millimeters. Panelfold is constantly developing its products and reserves the right to change specifications and materials without notice. Copyright® 1998 by Panelfold, Inc. All rights reserved.

For further information, or additional technical information, contact your Panelfold distributor.

Panelfold®
FOLDING DOORS * ACOUSTICAL FOLDING PARTITIONS * OPERABLE WALLS * RELOCATABLE WALLS
Panelfold, Inc. P.O. Box 680130, Miami, Florida 33168
(305) 688-3501 FAX: (305) 688-0185

SA 491.16

Send Enquiry