Excel Access Control Supervisor Pages 4-6. CSI 3-Part Specifications.

Excel Access Control Supervisor

---

Full Management Reporting Capability:
Access Control provides a number of status reports, database listings, and historical logs. Status reports indicate current condition of doors/elevators, lists all card holders "in" each building area, and can highlight on a graphic the areas to which a card holder is assigned. Database listings provide setup information for doors, elevators, schedules, floor groupings, building areas, and card holder data.

Historical logs include:

Valid Transactions Log—For valid door transactions, outputs card number and identification information, reader location, and date and time of access.

Audit Trail Log—Identifies the files which have been changed by an operator.

Access Commands Log—Provides a listing of all commands issued to a door or area by an operator.

Access Alarms Log—Provides a listing of all door/reader locations that indicated an alarm condition.

Antipassback Control Log—Lists antipassback activities performed by operators.

Users determine which records are to be included in historical logs and whether to print or just display the output.

Multiple Card Technologies to Fit Specific Applications:
A variety of card reader types and styles are available for use with Access Control. Card reader technologies include magnetic stripe, barium ferrite, Wiegand, and proximity. To accommodate building materials, applications, and building decor, the card readers are available in insertion, swipe, turnstile, and SENSORKEY™ styles. For added security, Personal Identification Number (PIN) Pads integral with or located next to the readers are available. PIN Pads allow for entry of user-defined access codes. In addition, when using special access codes, PIN Pads can notify the Graphic Central operator that entry is under duress.

Distributed Database Provides Full Stand-Alone Operation:
If AMCs lose communication with the Graphic Central, the AMCs can use their existing data files to continue making access decisions. Once communication is reestablished, the AMC requests current data for all respective cards and sends the transaction information to Graphic Central. An AMC can retain up to 1000 transactions.

System Integration of Access Control, Fire Alarm, Building Controls, and Energy Management:
An Excel Building Supervisor – Integrated can also support R7044 Excel Plus Controllers for energy management and HVAC control and FS90 Fire & Security Systems for fire alarm control. With a fully integrated system, Excel Building Supervisor – Integrated can coordinate and control overall building functions. For example, to accommodate off-hour cleaning personnel, Excel Building Supervisor – Integrated can coordinate Access Control and a lighting control program to simultaneously permit access and temporarily light a particular area.

™ SENSORKEY is a trademark of Sensor Engineering Co.

SPECIFICATIONS

System Capacities:
Up to 29 AMCs per F&S bus
Up to 16,000 cards per system
Up to 8 readers (with or without keypad) per AMC (up to 2 AR Reader Interface Boards per AMC, up to 4 readers per AR Board)
240 Areas maximum
240 Elevators maximum
96 Floors maximum
250 Schedules with 8 day/time periods maximum
250 Floor groupings, each with an 8 day/time period schedule
Response time: 1 sec per card in AMC data file

Personal Computer
Hardware:
W7052/3 Gateway with F&S bus(es).

See W7052B-G Gateway Specification Data Sheet 74-2926 and W7053A-G Gateway Specification Data Sheet 74-2927 for more details.

Software:
MS-DOS 3.3 by Microsoft Corporation
Microsoft Windows™ Ver. 3.0
DOS SQLBase Single-User/Run software from Gupta Technologies Inc. (called "DBWindows" on screen)
Excel by Microsoft Corporation
Micrografx Designer™
S999 DeltaNet Access Control Operating System
S985 DeltaNet Graphic Central
Operating System
S979 Coprocessor Board EPROM
S980 PC Communication Board
EPROM (one per board)
S1002 Remote Terminal
S1014 LAN

Access Management Controller

Function Boards:

Power Requirements:
Power Supply/Charger

14505148-001:
Input 120V ac, +10%, -15%, 50/60 Hz
28V dc output
2A max in supervision
4A max in alarm/recharge

Power Supply Cable 14505145
Batteries:

24V dc, float-charged from power supply/charger

Environmental Limits:
Operating: 32 to 120F (0 to 49C), 5 to 95% rh noncondensing

Enclosure:

Mounting:
Surface or semiflush

Dimensions:
Single enclosure: 24 in. (610 mm) high x 22-1/4 in. (565 mm) wide x 7-3/4 in. (197 mm) deep
Double enclosure: 38 in. (965 mm) high x 22-1/4 in. (566 mm) wide x 7-3/4 in. (197 mm) deep

Shipping Weight:
Motherboard: 25 lb (1.1 kg)
Power supply: 8 lb (3.6 kg)
Enclosures:

Single 23 lb (10.4 kg)
Double 31 lb (14.1 kg)

Enclosure Door:

Single 8 lb (3.6 kg)
Double 12 lb (5.4 kg)

Batteries:
14506056-001 (two for 6.5 Ah): 5.7 lb (2.6 kg)
14506056-002 (two for 26 Ah): 18.7 lb (8.5 kg)

Door Strike Control:
AR Reader Interface Board: Provides 24V nominal (19 to 30V) power for door strike control
DA/DC Accessory Relay Board: Switches up to 2A and 30V max for controlling door strike
Control Relay Assembly 14505172: For door strike control using 120V ac
Door strikes can be normally energized or de-energized

Wiring:
Wiring to card reader must be within 500 ft (152m), 18 to 22 AWG (0.8 to 0.3 sq mm)
Door strike wiring: Must be within 500 ft (152m) from AMC, 14 AWG (2.1 sq mm) max

Request-to-Exit wiring: 500 ft (152m), 14 AWG (2.1 sq mm) twisted pair

Accessories:

• Card Readers
• Door Strikes
• Request-to-Exit Switches (n.o. or n.c.)
• Motherboard-to-Motherboard Cable for inside enclosure 14505154-001
• Motherboard-to-Motherboard Cable for between enclosures 14505154-002
• Legend Cards 14505149
• Lightning Protectors 14502412
• Tamper Switch 14505154

Card Reader Technologies:
Magnetic Stripe
Barium Ferrite
Wiegand
Proximity
PIN Pad

Software Licensing:
Before software delivery, the end user must execute a software license agreement.

Approvals:
UL 294, 864, and 1076