FTA006. CSI 3-Part Specifications.

1/4" SADDLE WITH 1/4" ELEVATOR, AND 1/4" STOP FTA006 Rev 5-92

SPECIFIER NOTE:

THE FOLLOWING DATA IS INTENDED TO ASSIST IN SPECIFYING PEMKO

PRODUCTS. INCORPORATE IN A PROJECT SPECIFICATION WHERE

APPROPRIATE.

CAREFULLY REVIEW TO ENSURE COORDINATION WITH ALL CONTRACT

DOCUMENTS.

1. PRODUCT: 1/4" SADDLE WITH 1/4" ELEVATOR, AND 1/4" STOP

Pemko #276A x 282A with 290ASSTOP

2. MANUFACTURER:

PEMKO * Ventura PEMKO * Memphis

4226 Transport Street 5535 Distribution Drive

Ventura, CA 93003 Memphis, TN 38141

Phone: (800) 283-9988 Phone (800) 824-3018

Fax: (800) 283-4050 Fax: (800) 243-3656

3. MATERIAL & FINISH:

SPECIFIER NOTE:

PRODUCT SELECTED IS AVAILABLE IN MATERIALS & FINISHES SPECIFIED

BELOW. WHERE MORE THAN ONE MATERIAL IS LISTED FOR A PRODUCT,

SELECT PARAGRAPH FOR MATERIAL YOU WANT.

EDIT BRACKETED TEXT TO SPECIFY FINISH. DELETE TEXT NOT DESIRED.

MATERIALS & FINISHES NOT LISTED MAY BE AVAILABLE BY SPECIAL

ORDER.

SADDLE, ELEVATOR & STOP:

Aluminum, Extruded

* Alloy Type 6063-T5

* Chemical and physical properties per the Aluminum Assoc.,

Inc.

* Federal Specification QQ-A-200/9C

* [276A X 282A w/290ASSTOP Mill finish,

276D X 282D w/290DSSTOP Dark bronze anodized,

276G X 282G w/290GSSTOP Gold anodized].

Architectural bronze (brass), Extruded

* CDA alloy 38500 (56.5% Copper, 2.75% Lead, 40.7% Zinc,

05% alum.)

* [276B X 282B w/290BVSTOP Mill finish, Oxidized & oil rubbed,

Polished, Satin brush] (NOTE: Brass available only with

black vinyl seal.)

SEAL:

Silicone Rubber, Extruded

* Federal Specification ZZ-R-755 Class 2A Grade 60 Type I & II

* -100 F. to +400 F

Vinyl, Flexible, Extruded Geon (Virgin material)

* Geon is a registered trade mark of the Geon Company.

* ASTM D2287-81

* [black,]

4. TEST & CODE COMPLIANCE

Handicapped: Complies with CABO/ANSI A117.1-1992, ADA 1990;

and ADAAG 1991 guidelines.

Fire Label: Classified By UL For Application To Swinging

Type Fire Doors of the Hollow Metal or Steel

Covered composite type Rated up to 3 Hours, or

Wood Core Fire Doors rated up to 1-1/2 Hours.

Listed and Labeled as Gasketing Materials.

Tested in accordance with UL10B by Underwriters

Laboratory, Inc. .

Smoke Label: Smoke tested by WYLE Laboratories in accordance

with UL 1784-90; meets the requirements of NFPA

105.

5. INSTALLATION:

Installation to be performed in strict accordance with

manufacturer's instructions furnished with product.

Threshold assembly. Carefully cope to fit within the frame

opening. Fasten with screws and anchors provided. Use a

sealant or compound at all edges and joints.

Stop. Carefully trim to fit within the stops of frame

opening. Trim seal to 1/16" longer than trimmed

saddle stop on each end. Press stop against door to assure

good seal, (do not over tighten - installer should be able to

slip business card between seal and door).Fasten to

threshold with #10 x 3/4" flat head self tapping machine

screws.

6.WARRANTY:

Guaranteed by manufacturer against defects in material or

workmanship for 3 years.