PEMKO
ASD036. CSI 3-Part Specifications.
TRIPLE SEAL SYSTEM SPECIFICATION ASD036 MAY
1995
SPECIFIER NOTE:
THE FOLLOWING DATA IS INTENDED TO ASSIST IN SPECIFYING PEMKO
PRODUCTS. INCORPORATE IN A PROJECT SPECIFICATION WHERE
APPROPRIATE.
CAREFULLY REVIEW TO ENSURE COORDINATION WITH ALL CONTRACT
DOCUMENTS.
1. PRODUCT: PEMKO TRIPLE SEAL SYSTEM
2. MANUFACTURER:
PEMKO Ventura PEMKO Memphis
4226 Transport Street 5535 Distribution Drive
Ventura, CA 93003 Memphis, TN 38141
Phone: (800) 283-9988 Phone: (800) 824-3018
Fax: (800) 283-4050 Fax: (800) 243-3656
3. MATERIAL & FINISH:
SPECIFIER NOTE:
PRODUCT SELECTED IS AVAILABLE IN MATERIALS & FINISHES SPECIFIED
BELOW. WHERE MORE THAN ONE MATERIAL IS LISTED FOR A PRODUCT, SELECT
PARAGRAPH FOR MATERIAL YOU WANT.
EDIT BRACKETED TEXT TO SPECIFY FINISH. DELETE TEXT NOT DESIRED.
MATERIALS & FINISHES NOT LISTED MAY BE AVAILABLE BY SPECIAL ORDER.
THRESHOLD: PEMKO No. 2005AS (With Silicone Rubber Seal per Federal
Specification ZZ-R-755 Class 2A Grade 60 Type I or II,
(-100 F. to +400 F.)
Aluminum, Extruded
* Alloy Type 6063-T5
* Chemical and physical properties per the Aluminum
* Federal Specification QQ-A-200/9C.
* [2005AS, Mill Finish; 2005DS, Dark Bronze Anodized;
2005GS, Gold Anodized]
Architectural Bronze (brass), Extruded,
* CDA Alloy 38500 (56.5% Copper, 40.7% Zinc,
2.75% Lead, .05% Aluminum;
* [2005BS, Mill Finish; Oxidized & Oil Rubbed;
Polished; Satin Brushed]
AUTOMATIC DOOR BOTTOM: PEMKO No. 434APKL or 434ARL (not shown)
CASE HOUSING:
Aluminum, Extruded .
* Alloy Type 6063-T5
* Chemical and physical properties per the Aluminum
Association, Inc.
* Federal Specification QQ-A-200/9C.
* Mill Finish
SEAL: "PK"
PemkoPrene thermoplasric rubber, Extruded
* Temperature range -75 F . to +275 F.
SEAL: "R"
Sponge neoprene, Extruded
* Neoprene, closed cell sponge per ASTM D 1056-85 Type 2
* MIL-R6130C Type II Grade C;
* Temperature range -67 F. to +170 F.
DOOR BOTTOM SWEEP: PEMKO No. 315CN
HOUSING
Aluminum, Extruded .
* Alloy Type 6063-T5
* Chemical and physical properties per the Aluminum
Association, Inc.
* Federal Specification QQ-A-200/9C.
* [315CN, Clear Anodized; 315DN, Dark Bronze Anodized;
315GN Gold Anodized]
Architectural Bronze (brass), Extruded,
* CDA Alloy 38500 (56.5% Copper, 40.7% Zinc,
2.75% Lead, .05% Aluminum;
* [2005BS, Mill Finish; Oxidized & Oil Rubbed;
Polished; Satin Brushed]
SEAL:
Solid neoprene, Extruded
* ASTM D2000-90 M2BC 507
* MIL-R-6855 Class 2
PERIMETER GASKETING: No. S88D
Silicone Rubber, Extruded
* Federal Specification ZZ-R-755 Class 2A Grade 60 Type I
or II;
* Temperature Range:(Silicone) -100 F. to +400 F.
(Adhesive) -50 F. to +150 F.
* [S88D, Dark Bronze; S88TAN, Tan; S88W, White]
PERIMETER GASKETING PEMKO 319CR
HOUSING
Aluminum, Extruded .
* Alloy Type 6063-T5
* Chemical and physical properties per the Aluminum
Association, Inc.
* Federal Specification QQ-A-200/9C.
* [319CR, Clear Anodized; 319DR, Dark Bronze Anodized;
319GR Gold Anodized]
Architectural Bronze (brass), Extruded,
* CDA Alloy 38500 (56.5% Copper, 40.7% Zinc,
2.75% Lead, .05% Aluminum;
* [319BR, Mill Finish; Oxidized & Oil Rubbed;
Polished; Satin Brushed]
SEAL:
Sponge neoprene, Extruded
* Neoprene, closed cell sponge per ASTM D 1056-85 Type 2
* MIL-R6130C Type II Grade C;
* Temperature range -67 F. to +170 F.
4.TEST & CODE COMPLIANCE:
Fire Label: Classified By UL For Application To Swinging
Type Fire Doors of the Hollow Metal or Steel
Covered composite type Rated up to 3 Hours, or
Wood Core Fire Doors rated up to 1-1/2
Hours Listed and Labeled as Gasketing
Materials. Tested in accordance with UL10B
by Underwriters Laboratory, Inc. .
Smoke Label: Smoke tested by WYLE Laboratories in
accordance with UL 1784-90; meets the
requirements of NFPA 105.
Handicapped: Threshold complies with CABO/ANSI A117.1-1992;
ADA 1990; and ADAAG 1991 Guidelines.
5.INSTALLATION:
Installation to be performed in strict accordance with
manufacturers instructions furnished with product.
Threshold: Carefully cope to fit within frame opening.
Fasten with flat head wood or machine screws provided and
appropriate anchors as required. Use sealant or compound at
all edges and joints.
Automatic Door Bottom: Requires door factory fabricated
with full-mortise preparation. Note: When requested
Pemko supplies door preparation templates. Cut-down as
required and fasten to door (door must be removed from
frame). Adjust for proper contact with threshold.
Door Bottom Sweep: Cut to length equal to door width and
fasten to bottom of door. Adjust for proper contact with
threshold.
Perimeter Gasketing:S88, Clean surfaces and allow to dry
shown, with joints between contiguous lengths at corners
only. Carefully miter or cope at corners to ensure tight
319CR, Fasten to header first, then jambs, ensure contact
at threshold, hold lightly against door and install
Carefully miter or cope at corners to ensure tight joints
and continuous seal. Adjust as required and tighten screws.
6 WARRANTY:
Guaranteed by manufacturer against defects in material or
workmanship for three years.