ASD025. CSI 3-Part Specifications.

FIRE LABELED SYSTEM 2 (CROSS CORRIDOR) SPECIFICATION

ASD025 Rev May 1995

SPECIFIER NOTE:

THE FOLLOWING DATA IS INTENDED TO ASSIST IN SPECIFYING PEMKO

PRODUCTS. INCORPORATE IN A PROJECT SPECIFICATION WHERE

APPROPRIATE.

CAREFULLY REVIEW TO ENSURE COORDINATION WITH ALL CONTRACT

DOCUMENTS.

1. PRODUCT: PEMKO FIRE LABELED SYSTEM No. 2, CROSS CORRIDOR PAIR

2. MANUFACTURER:

PEMKO * Ventura PEMKO * Memphis

4226 Transport Street 5535 Distribution Drive

Ventura, CA 93003 Memphis, TN 38141

Phone:(800) 283-9988 Phone (800) 824-3018

Fax: (800) 283-4050 Fax: (800) 243-3656

3. MATERIAL & FINISH:

SPECIFIER NOTE:

PRODUCT SELECTED IS AVAILABLE IN MATERIALS & FINISHES SPECIFIED

BELOW. WHERE MORE THAN ONE MATERIAL IS LISTED FOR A PRODUCT,

SELECT PARAGRAPH FOR MATERIAL YOU WANT.

EDIT BRACKETED TEXT TO SPECIFY FINISH. DELETE TEXT NOT DESIRED.

MATERIALS & FINISHES NOT LISTED MAY BE AVAILABLE BY SPECIAL

ORDER.

(OPTION) THRESHOLD: PEMKO No. 2364A

Aluminum, Extruded

* Alloy Type 6063-T5

* Chemical and physical properties per the Aluminum

Association, Inc.

* Federal Specification QQ-A-200/9C.

* [2364A, Mill Finish; 2364D, Dark Bronze Anodized;

2364G, Gold Anodized]

(OPTION) FLOOR PLATE: PEMKO No. 192A

Aluminum, Extruded

* Alloy Type 6063-T5

* Chemical and physical properties per the Aluminum

Association, Inc.

* Federal Specification QQ-A-200/9C.

* [192A, Mill Finish; 192D, Dark Bronze Anodized;

192G, Gold Anodized]

SPECIFIER NOTE: THE FOLLOWING ITEM SHOULD BE SPECIFIED ON AN AS

REQUIRED BASIS.

AUTOMATIC DOOR BOTTOM: PEMKO No. 4301CRL

CASE HOUSING:

Aluminum, Extruded .

* Alloy Type 6063-T5

* Chemical and physical properties per the Aluminum

Association, Inc.

* Federal Specification QQ-A-200/9C.

* [4301BDGR, Bright Dip Gold Anodized; 4301CRL, Clear

Anodized; 4301DRL, Dark Bronze Anodized]

SEAL:

Sponge neoprene, Extruded

* Neoprene, closed cell sponge per ASTM D 1056-85

Type 2

* MIL-R6130C Type II Grade C;

* Temperature range -67 F. to +170 F.

PERIMETER GASKETING: PEMKO No. 290AS

HOUSING:

Aluminum, Extruded

* Alloy Type 6063-T5

* Chemical and physical properties per the Aluminum

Association, Inc.

* Federal Specification QQ-A-200/9C.

* [290AS, Mill Finish; 290DS, Dark Bronze Anodized;

290GS, Gold Anodized]

SEAL:

Silicone Rubber, Extruded

* Federal Specification ZZ-R-755 Class 2A Grade 60

Type I or II;

* Temperature Range: -100 F. to +400 F.

ASTRAGAL: PEMKO No. 357SP

(NOTE: 1/4-20 THRU BOLTS RECOMMENDED)

Steel, Hot Rolled

* AISI Type 1010

* Federal Specification QQ-S-636

* ASTM A245

* [357SP, Gray primed, 357SC, Zinc plated].

Stainless Steel (357SS)

* AISI Type 304

* #3 Finish

ASTRAGAL SEAL: PEMKO No. S88D

Silicone Rubber, Extruded

* Federal Specification ZZ-R-755 Class 2A Grade 60

Type I or II;

* Temperature Range:(Silicone) -100 F. to +400 F.

(Adhesive) -50 F. to +150 F.

* [S88D, Dark Bronze; S88TAN, Tan; S88W, White]

4.TEST & CODE COMPLIANCE:

Fire Label: Classified By UL For Application To Swinging

Type Fire Doors of the Hollow Metal or Steel

Covered composite type Rated up to 3 Hours, or

Wood Core Fire Doors rated up to 1-1/2

Hours Listed and Labeled as Gasketing

Materials. Tested in accordance with UL10B

by Underwriters Laboratory, Inc. .

Smoke Label: Smoke tested by WYLE Laboratories in

accordance with UL 1784-90; meets the

requirements of NFPA 105.

Handicapped: Threshold complies with CABO/ANSI A117.1-

1992; ADA 1990; ADAAG 1991 Guidelines.

5.INSTALLATION:

Installation to be performed in strict accordance with

manufacturers instructions furnished with product.

Threshold: Carefully cope to fit within frame opening.

Fasten with flat head wood or machine screws provided

and appropriate anchors as required. Use sealant or

compound at all edges and joints.

Automatic Door Bottom: Cut-down as required and fasten

to door. Adjust for proper contact with threshold.

Perimeter Gasketing: Fasten to header first, then jambs,

ensure contact at threshold, hold lightly against door

and install screws in center of slots (drill metal

frame 7/64" or #36) Carefully miter or cope at corners

to ensure tight joints and continuous seal. Adjust as

required and tighten screws.

Astragal: Cut astragal to match door height. Install on

required leaf with screws provided. (NOTE: through bolts

recommended).

Astragal seal: Clean surface and allow to dry before

applying. Apply to door edge adjacent astragal as shown.

6 WARRANTY:

Guaranteed by manufacturer against defects in material

or workmanship for three years.