ASD022. CSI 3-Part Specifications.

SMOKE SEAL SYSTEM 5 (CONFERENCE ROOM) SPECIFICATION

ASD022 Rev May 1995

SPECIFIER NOTE:

THE FOLLOWING DATA IS INTENDED TO ASSIST IN SPECIFYING PEMKO

PRODUCTS. INCORPORATE IN A PROJECT SPECIFICATION WHERE

APPROPRIATE.

CAREFULLY REVIEW TO ENSURE COORDINATION WITH ALL CONTRACT

DOCUMENTS.

1. PRODUCT: PEMKO SmokeSeal SYSTEM No. 5, CONFERENCE ROOM

2. MANUFACTURER:

PEMKO * Ventura PEMKO * Memphis

4226 Transport Street 5535 Distribution Drive

Ventura, CA 93003 Memphis, TN 38141

Phone:(800) 283-9988 Phone (800) 824-3018

Fax: (800) 283-4050 Fax: (800) 243-3656

3. MATERIAL & FINISH:

SPECIFIER NOTE:

PRODUCT SELECTED IS AVAILABLE IN MATERIALS & FINISHES SPECIFIED

BELOW. WHERE MORE THAN ONE MATERIAL IS LISTED FOR A PRODUCT,

SELECT PARAGRAPH FOR MATERIAL YOU WANT.

EDIT BRACKETED TEXT TO SPECIFY FINISH. DELETE TEXT NOT DESIRED.

MATERIALS & FINISHES NOT LISTED MAY BE AVAILABLE BY SPECIAL

ORDER.

THRESHOLD: PEMKO No. 2364A

Aluminum, Extruded

* Alloy Type 6063-T5

* Chemical and physical properties per the Aluminum

Association, Inc.

* Federal Specification QQ-A-200/9C.

* [2364A, Mill Finish; 2364D, Dark Bronze Anodized;

2364G, Gold Anodized]

AUTOMATIC DOOR BOTTOM: PEMKO No. 4131CRL

CASE HOUSING:

Aluminum, Extruded .

* Alloy Type 6063-T5

* Chemical and physical properties per the Aluminum

Association, Inc.

* Federal Specification QQ-A-200/9C.

* [4131BDGRL Bright Dip Gold Anodized; 4131CRL,

Clear Anodized; 4131DRL, Dark Bronze Anodized]

SEAL:

Sponge neoprene, Extruded

* Neoprene, closed cell sponge per ASTM D 1056-85

Type 2

* MIL-R6130C Type II Grade C;

* Temperature range -67 F. to +170 F.

PERIMETER GASKETING: No. 305CR

HOUSING:

Aluminum, Extruded

* Alloy Type 6063-T5

* Chemical and physical properties per the

Aluminum Association, Inc.

* Federal Specification QQ-A-200/9C.

* [305CR, Clear Anodized; 305DR, Dark Bronze

Anodized; 305GR, Gold Anodized]

Architectural Bronze (brass), Extruded,

* CDA Alloy 38500 (56.5% Copper, 40.7% Zinc,

2.75% Lead,.05% Aluminum;

* [305BR, Mill Finish; Oxidized & Oil Rubbed;

Polished; Satin Brushed]

SEAL::

Sponge neoprene, Extruded

* Neoprene, closed cell sponge per ASTM D 1056-85

Type 2

* MIL-R6130C Type II Grade C;

* Temperature range -67 F. to +170 F

MEETING STILE ASTRAGALS: PEMKO No. 305CN

HOUSING:

Aluminum, Extruded

* Alloy Type 6063-T5

* Chemical and physical properties per the Aluminum

Association, Inc.

* Federal Specification QQ-A-200/9C.

* [305CN, Anodized Clear; 305DN, Dark Bronze

Anodized; 305GN, Gold Anodized]

Architectural Bronze (brass), Extruded,

* CDA Alloy 38500 (56.5% Copper, 40.7% Zinc,

2.75% Lead,.05% Aluminum;

* [305BN, Mill Finish; Oxidized & Oil Rubbed;

Polished; Satin Brushed]

SEAL::

Solid neoprene, Extruded

* ASTM D2000-90 M2BC 507

* MIL-R-6855 Class 2

* Temperature range -67 F. to +170 F

4.TEST & CODE COMPLIANCE:

Fire Label: Classified By UL For Application To Swinging

Type Fire Doors of the Hollow Metal or Steel

Covered composite type Rated up to 3 Hours, or

Wood Core Fire Doors rated up to 1-1/2

Hours Listed and Labeled as Gasketing

Materials. Tested in accordance with UL10B

by Underwriters Laboratory, Inc. .

Smoke Label: Smoke tested by WYLE Laboratories in

accordance with UL 1784-90; meets the

requirements of NFPA 105.

Handicapped: Threshold complies with CABO/ANSI A117.1-

1992; ADA 1990; ADAAG 1991 Guidelines.

5.INSTALLATION:

Installation to be performed in strict accordance with

manufacturers instructions furnished with product.

Threshold: Carefully cope to fit within frame opening.

Fasten with flat head wood or machine screws provided

and appropriate anchors as required. Use sealant or

compound at all edges and joints

Automatic Door Bottom: Cut-down as required and fasten

to door. Adjust for proper contact with threshold.

Perimeter Gasketing: Fasten to header first, then jambs,

ensure contact at threshold, hold lightly against door

and install screws in center of slots (drill metal

frame 7/64" or #36) Carefully miter or cope at corners

to ensure tight joints and continuous seal. Adjust as

required and tighten screws.

Meeting Stile Astragals: Cut astragals to match door

height. Install on inactive leaf first and adjust so as

not to interfere with active leaf closing. Install on

active leaf, adjust as required to seal.

6 WARRANTY:

Guaranteed by manufacturer against defects in material

or workmanship for three years.