305N. CSI 3-Part Specifications.

305CN SPEC 305N Rev May 1995

SPECIFIER NOTE:

THE FOLLOWING DATA IS INTENDED TO ASSIST IN SPECIFYING PEMKO

PRODUCTS. INCORPORATE IN A PROJECT SPECIFICATION WHERE

APPROPRIATE.

CAREFULLY REVIEW TO ENSURE COORDINATION WITH ALL CONTRACT

DOCUMENTS.

1. PRODUCT: Splip Astragal Weatherstrip with Neoprene flaps,

(3/16" X 1-5/16"), Pemko #305CN (2 each req'd)

2. MANUFACTURER:

PEMKO * Ventura PEMKO * Memphis

4226 Transport Street 5535 Distribution Drive

Ventura, CA 93003 Memphis, TN 38141

Phone:(800) 283-9988 Phone (800) 824-3018

Fax: (800) 283-4050 Fax: (800) 243-3656

3. MATERIAL & FINISH:

SPECIFIER NOTE:

PRODUCT SELECTED IS AVAILABLE IN MATERIALS & FINISHES SPECIFIED

BELOW. WHERE MORE THAN ONE MATERIAL IS LISTED FOR A PRODUCT,

SELECT PARAGRAPH FOR MATERIAL YOU WANT.

EDIT BRACKETED TEXT TO SPECIFY FINISH. DELETE TEXT NOT DESIRED.

MATERIALS & FINISHES NOT LISTED MAY BE AVAILABLE BY SPECIAL

ORDER.

HOUSING:

Aluminum, Extruded

* Alloy Type 6063-T5

* Chemical and physical properties per the Aluminum Assoc.,

Inc.

* Federal Specification QQ-A-200/9C

* [305CN Clear anodized, 305DN Dark bronze anodized,

305GN Gold anodized].

Architectural bronze (brass), Extruded

* CDA alloy 38500 (56.5% Copper, 2.75% Lead, 40.7% Zinc,

0.05% alum.)

* [305BN Mill finish, Oxidized & oil rubbed, Polished, Satin

brush]

SEAL:

Neoprene, Solid, Extruded

* ASTM D2000-90 M2BC 507

* Mil-R-6855 Class 2 Grade 40

* Mil-R-6855 Class 2 Grade 50

* -67 F to +170 F.

4. TEST & CODE COMPLIANCE

Fire Label: Classified By UL For Application To Swinging

Type Fire Doors of the Hollow Metal or Steel

Covered composite type Rated up to 3 Hours, or

Wood Core Fire Doors rated up to 1-1/2 Hours.

Listed and Labeled as Gasketing Materials.

Tested in accordance with UL10B by Underwriters

Laboratory, Inc. .

Smoke Label: Smoke tested by WYLE Laboratories in accordance

with UL 1784-90; meets the requirements of NFPA

105.

5. INSTALLATION:

Installation to be performed in strict accordance with

manufacturer's instructions furnished with product.

Trim to length required and place on the pair of doors at the

meeting stile edges. Install screws in center of slots. Slide

units together at center of the pair of doors so that the flaps

overlap assuring an optimum seal, then tighten screws.

6. WARRANTY:

Guaranteed by manufacturer against defects in material or

workmanship for 3 years.