249. CSI 3-Part Specifications.

49AV SPEC 249 Rev May 1995

SPECIFIER NOTE:

THE FOLLOWING DATA IS INTENDED TO ASSIST IN SPECIFYING PEMKO

PRODUCTS. INCORPORATE IN A PROJECT SPECIFICATION WHERE

APPROPRIATE.

CAREFULLY REVIEW TO ENSURE COORDINATION WITH ALL CONTRACT

DOCUMENTS.

1. PRODUCT: Adjustable Vinyl Top Threshold (5/8" X 3-1/2"),

Pemko #249AV

2. MANUFACTURER:

PEMKO * Ventura PEMKO * Memphis

4226 Transport Street 5535 Distribution Drive

Ventura, CA 93003 Memphis, TN 38141

Phone:(800) 283-9988 Phone (800) 824-3018

Fax: (800) 283-4050 Fax: (800) 243-3656

3. MATERIAL & FINISH:

SPECIFIER NOTE:

PRODUCT SELECTED IS AVAILABLE IN MATERIALS & FINISHES SPECIFIED

BELOW. WHERE MORE THAN ONE MATERIAL IS LISTED FOR A PRODUCT,

SELECT PARAGRAPH FOR MATERIAL YOU WANT.

EDIT BRACKETED TEXT TO SPECIFY FINISH. DELETE TEXT NOT DESIRED.

MATERIALS & FINISHES NOT LISTED MAY BE AVAILABLE BY SPECIAL

ORDER.

THRESHOLD:

Aluminum, Extruded

* Alloy Type 6063-T5

* Chemical and physical properties per the Aluminum

Association, Inc.

* Federal Specification QQ-A-200/9C

* [249AV Mill finish, 249DV Dark bronze anodized,

249GV Gold anodized, 249BDGV Bright dip gold anodized,

249PWV Painted white].

SEAL:

Vinyl, Flexible, Extruded Geon (Virgin material)

* Geon is a registered trade mark of B.F. Goodrich

* ASTM D2287-81

4. TEST & CODE COMPLIANCE:

Fire Label: Classified By UL For Application To

Wood Covered Composite and Wood Core

Type Fire Doors rated up to 20 minutes.

Listed and Labeled as Gasketing Materials.

Tested in accordance with UL10B by

Underwriters Laboratory, Inc. .

5. INSTALLATION:

Installation to be performed in strict accordance with

manufacturer's instructions furnished with product.

Carefully cope to fit within the frame opening. Trim vinyl

seals to 1/16" longer than trimmed threshold on each end.

Make sure that vinyl-top sets directly under door. Lift

vinyl-top on free edge, revealing adjusting screws and

mounting holes.

Fasten with flat head wood or machine screws provided and

appropriate anchors as required. Use a sealant or compound at

all edges and joints Adjust each adjusting screw until

approximately 1/4" remains between the bottom of the door

when closed. Insert free edge of vinyl-top into slot. Inspect

to see that the vinyl-top is sealing against the bottom of

the door.

6. WARRANTY:

Guaranteed by manufacturer against defects in material or

workmanship for 3 years.