PEMKO  

216. CSI 3-Part Specifications.

216APK SPEC 216 Rev May 1995

SPECIFIER NOTE:

THE FOLLOWING DATA IS INTENDED TO ASSIST IN SPECIFYING PEMKO

PRODUCTS. INCORPORATE IN A PROJECT SPECIFICATION WHERE

APPROPRIATE.

CAREFULLY REVIEW TO ENSURE COORDINATION WITH ALL CONTRACT

DOCUMENTS.

1. PRODUCT: Door Shoe, "U" Shape w/Raindrip and PemkoPrene Seal

(For 1-3/4" Door), Pemko #216APK

2. MANUFACTURER

PEMKO * VENTURA PEMKO * MEMPHIS

4226 Transport Street 5535 Distribution Drive

Ventura, CA 93003 Memphis, TN 38141

Phone: (800) 283-9988 Phone (800) 824-3018

Fax: (800) 283-4050 Fax: (800) 243-3656

3. MATERIAL & FINISH:

SPECIFIER NOTE:

PRODUCT SELECTED IS AVAILABLE IN MATERIALS & FINISHES SPECIFIED

BELOW. WHERE MORE THAN ONE MATERIAL IS LISTED FOR A PRODUCT,

SELECT PARAGRAPH FOR MATERIAL YOU WANT.

EDIT BRACKETED TEXT TO SPECIFY FINISH. DELETE TEXT NOT DESIRED.

MATERIALS & FINISHES NOT LISTED MAY BE AVAILABLE BY SPECIAL

ORDER.

DOORSHOE:

Aluminum, Extruded

* Alloy Type 6063-T5

* Chemical and physical properties per the Aluminum

Association, Inc.

* Federal Specification QQ-A-200/9C

* [216APK Mill finish, 216BDGPK Bright dip gold anodized,

216DPK Dark bronze anodized, 216GPK Gold anodized,

216PWPK Painted white].

 

SEAL:

PemkoPrene , Extruded thermoplastic elastomer

* Flexable between -70 F and +250 F

* Excellent flex fatigue

* Outstanding ozone resistance

4. TEST & CODE COMPLIANCE:

Fire Label: Classified By UL For Application To Swinging

Type Fire Doors of the Hollow Metal or Steel

Covered composite type Rated up to 3 Hours, or

Wood Core Fire Doors rated up to 1-1/2 Hours.

Listed and Labeled as Gasketing Materials.

Tested in accordance with UL10B by Underwriters

Laboratory, Inc. .

Smoke Label: Smoke tested by WYLE Laboratories in accordance

with UL 1784-90; meets the requirements of NFPA

-105.

5. INSTALLATION:

Installation to be performed in strict accordance with

manufacturer's instructions furnished with product.

Carefully trim and notch to fit within the stops of the frame

opening. Trim PemkoPrene seal to 1/16" longer than trimmed door

shoe on each end. Open door and slip door shoe onto bottom of

door. Adjust for best seal, then fasten with #6 x 5/8" sheet

metal screws.

6. WARRANTY:

Guaranteed by manufacturer against defects in material or

workmanship for 3 years.