SL3000-UL-1. CSI 3-Part Specifications.

Elite Access Systems
25741 Commercentre Drive
Lake Forest, CA 92630
(714)580-1700
http://www.eliteaccess.com
[email protected] 

ARCHITECTURAL SPECIFICATIONS MODEL CSW-200-UL

MECHANICAL SPECIFICATIONS

Chassis - Constructed with 1/4" sheet metal that is fully sanded, welded, and gold/zinc-plated.

Output shaft - 1" cold-rolled steel.

Worm gear reduction - 30-to-1 worm gear reduction in an oil bath.

Motor - Two 1/2 hp, instant reversing, 120VAC, 8/8 amp. One motor opens gate the other one closes it.

Cover - Heavy-duty Fiberglass and stainless steel for excellent heat and corrosion resistance.

Finishing - All metal parts are gold/zinc-plated for rust-proof protection.

Emergency release - The best option is our Fire Release box Model CP-17 which can release the gate from either side. The Hand Crank is standard.

Cycles - 35 hour with 36 foot gate.

Capabilities - Maximum gate length 37' Maximum gate weight 2000 lbs.

Gate traveling speed - 12" per second.

Dimensions - L17" x W17" x H26"

Weight - 130 lbs. SHIPPING-142 lbs.

Approval - UL approved for the USA and Canada. Also approved by the City of Los Angeles Department of Building and Safety Electrical Testing Lab.

ELECTRONIC SPECIFICATIONS

Modular board - Uses LEDs to indicate all input and output functions of the gate operator.

ERD - The two-way reversing sensor can be set for close or open cycles. If the gate hits an object while closing, it reverses. If it hits an object while opening, it stops.

Digital motor protection - Shuts off the motor after it reaches the stall amp for 3 seconds, then resets itself within 15 seconds.

Timer - Can be set from 0 to 60 seconds or for a "switch open/switch close" type operation.
Master/slave - Dictates synchronized movement between two gate operators.

3 spike suppressors - Fast response time (50 nanoseconds) when subject to an impulse surge (lightning strike) up to 100 amps.

Overload alarm sensor - Alarm is activated (beep sound) whenever the motion of the gate is held by an unwanted object.

Alternate outputs - Master/slave, alarm system, center loop, pilot door, and one 3-push-button station.

Electronic inputs - Radio receiver, key switches, safety loop, drop-out loop, exit loop, telephone entry system, computer inputs, fire department key switch and 3-push-button station.

Gate traveling time - Adjusted by a precision mechanical device and electrical limit
switch.

Note: Gate travel speed may be impeded by installation, ambient temperature, voltage differences and frequencies.

5 YEAR WARRANTY-SINGLE HOME USE
3 YEAR WARRANTY-COMMERCIAL USE

Elite Access Systems, Inc. warrants all commercial Gate Operators to be free of defects in workmanship and material for a period of 5 years for single home use and 3 years for commercial use, from the date of purchase. The warranty includes 5 years for single home use and 3 years for commercial use for the gear reducer, electric motor, and all other components, except the electronic control board which is 3 years for single home use and 2 years for commercial use. Wear and tear on all SL3000 gate operators is included in this policy. Vandalism is not covered under this warranty policy. Caution, in order to obtain full warranty, send the registration card by certified mail within 30 days from purchasing date to Elite Access Systems, Inc., otherwise a one year warranty will apply. Materials, components and specifications are subject to change without notice.