architecture - engineering - construction
AECinfo.com

About Waterstop Tools

Brochures  

Waterstop Tools

Waterstop Splicing Irons

JPS Standard Irons are specifically designed for welding waterstops, and other thermoplastic extruded profiles (expansion joints, seals). The temperature control can be adjusted from 250°F to 500°F to accommodate various ambient conditions and different polymers. All JPS Standard Irons are constructed with the highest quality components.

Peel and Stick Teflon Covers

We factory cut our high-quality Teflon® replacement covers, so all you have to do is peel off the release paper and adhere it to the warm iron. No trimming is required.

ElectroTest Spark Tester

The ElectroTest is a portable, high frequency generator used for the detection of pinholes in field welds of waterstop.

Condrive™ 1000 Tapcon Tool

Used for installing Tapcon® or Tapper® fasteners with various Earth Shield® Retrofit Waterstop Systems.

EB Cap Waterstop Welding Jig

Our all-aluminum waterstop welding jig is designed to align and weld straight lengths of all Earth Shield® Expansion Board Cap profiles including JP158, JP1225, JPEB350, JPEB375, and JPEB375R. Used in conjunction with our large waterstop splicing irons.

Factory Installed Eyelets

Secure your waterstop 12” on-center with factory-installed brass eyelets. Eliminates all of the labor associated with hog rings.

Pro Built Waterstop Splicing Irons

Designed for the waterstop pro! Our Pro Series irons feature all the same attributes as our regular irons plus built-in thermometer, temperature control knob, outdoor-use power cord (UL and CSA approved), ergonomic vinyl grip, sealed elements, and a Silverstone coating that doesn't require covers.

ST-10 Waterstop Splicing Table

The ST-10® was designed and patented by J P Specialties as the perfect solution for producing high-tensile strength, leakproof welds on thermoplastic waterstops such as PVC, LDPE, TPER, and TPV. New quality assurance standards in today’s waterstop specifications mandate tensile testing across field welded joints, usually requiring tensile strength 80% or better of the parent material. Waterstops welded with the ST-10® assure the Contractor that their workmanship will yield results conducive to these rigorous requirements. The ST-10® is also an extreme labor saver, taking a two-man job — welding waterstop — and taking it down to just one man.

Hog Ring Pliers and Hog Rings

Waterstop Hog Rings
Copper-clad, hill-shaped, size #3 hog rings fits every Earth Shield® TPV and PVC Waterstop profiles (as well as most other brands) with equal ease. Used to lash waterstop to the reinforcing steel during installation.

Waterstop Hog Ring Pliers
A durable, lightweight tool with unique torsion spring for ease of use and set screw to ensure perfect hog ring closure every time.

Waterstop Protector

Waterstop Protector protects embedded waterstop for extended periods of time. The protector fits most waterstop profiles and is constructed with heavy-duty, 20 gauge, electro-galvanized steel. Other grades, thicknesses, and metals are available, including for CH2M Hill specification.

Stainless Steel Waterstop Welding Jig

Our stainless steel waterstop welding jig is designed to perfectly align the straight lengths of Earth Shield® Stainless Steel Waterstop for field fabrication. Includes copper cool bar for heat sink.

Plastic Expansion Joint Filler Board

Earth Shield® Expansion Board Cap Waterstop is installed on top of conventional expansion board filler or Earth Shield’s own chemical resistant, plastic expansion board. The expansion board acts as the form; therefore, no form splitting is necessary. This greatly accelerates the project schedule and provides a long lasting, attractive finished concrete joint.

Waterstop Iron Stand

Holds JP414, JP614, and JP919 Waterstop Splicing Irons. All stainless steel and Delron construction.

Brochures for Waterstop Tools

Brochures for Waterstop Tools
Preview Description Format Size Open
How to install Waterstop
Ribbed Waterstop Installation Guidelines, Retrofit Waterstop Installation Guides, Expansion Board Cap Waterstop Installation Guide, Base Seal Waterstop Installation Guides, Waterstop Welding Guide, Waterstop Welding Movies, Waterstop Splicing Iron Safety Manual and Users Guide, Waterstop Split Forming, How to Install Type NB190®, How to Install Labyrinth Waterstop, How to Install Split Ribbed Waterstop, Carbon Steel Waterstop Installation Guidelines, ...
PDF 11 kB Open
Waterstop Chemcart
Waterstop Chemcart
PDF 493 kB Open
Waterstop eBook
Concrete is everywhere: Buildings, fountains, parking decks, locks and dams, roads and bridges, and myriad other constructions. Because of its long lifespan, high workability, and near-worldwide availability, concrete is the preferred building material for large structures, especially those subject to hydraulic pressure. Not all concrete structures require protection from the ingress of water or other fluids, but those that do require a properly installed waterstop in and along their concrete joints. The concrete joint is the most likely point of leakage and waterstops are uniquely designed to prevent this. This book’s sole purpose is to educate the reader on all facets of waterstop.
    Open


Request for Information / Request a Catalog from JP Specialties, Inc. about Waterstop Tools
 
(Please check companies and/or products above.)
 
*Name:    
*Email:    
Company:    
*Type:    
Phone:    
*Address:    
*Request:    
    (* = Mandatory field) 
Please add me to the mailing list for the free monthly e-Newsletter AECnews.  
     


News archive:
Waterstop Tools from JP Specialties (Feb 14, 2022)
FREE Webinar: Waterstops for Environmental Compliance of Liquid Tight Concrete Structures (May 07, 2015)
Special Complimentary Lunch & Engineer Seminar (Apr 11, 2014)
JP Specialties: Join Us For A Webinar on May 15 (May 06, 2013)
Waterstops for Environmental Compliance of Liquid Tight Concrete Structures (Feb 07, 2013)

03150 - Concrete Accessories
03 15 00 - Concrete Accessories
03 15 13 - Waterstops